GSK GSK928TE, Руководство пользователя

Страница: 21 / 187

GSK928TE
Ⅱ
Turning CNC System User Manual
16
Fig. 2 EDIT operating mode
Edit keys in EDIT mode
(1) cursor UP key
The cursor moves to the first character behind the block number of the upper block when the
key is pressed once.
The key being pressed down, the cursor sequentially moves up till the first block of block or
the key is released.
(2) cursor DOWN key
The cursor moves to the first character behind the block number of the next down block
when the key is pressed once.
The key being pressed down, the cursor sequentially moves down till the last block number
of block or the key is released.
(3) cursor LEFT key
The cursor moves left one character when the key is pressed once.
The key being pressed down, the cursor sequentially moves left till the first character of
block or the key is released.
(4) cursor RIGHT key
The cursor moves right one character when the key is pressed.
The key being pressed down, the cursor sequentially moves right till the last character of block
or the key is released.
Note
： Cursor — prompt identifier to indicate the current editable character position. There are
two states of CNC system.
A. The cursor is displayed to a horizontal line under a character in Insert mode.
B. The cursor is displayed to the pointed character in inverse and highlight. The two
cursors can be switched by .