GSK GSK928TE, Руководство пользователя

Страница: 30 / 187

GSK928TE
Ⅱ
Turning CNC System User Manual
25
(1) Press to move the cursor to the first one of two blocks.
(2) Press to move the cursor to the behind of last character, or press to move
directly the cursor to the behind of last character.
(3) Press , and the system will generate a new block number between two blocks (the
increment of sequence number is 1/4 integral value of P23, and if there is not enough, the
block number of the next block is rewritten.) and blank one block.
(4) Input the content of required block.
(5) After the content is input, is pressed to insert blocks. When only one block is inserted,
the operation is not executed.
(6) The inserting is completed.
(7) If the block is inserted before the first block, is pressed to move the cursor to the
under “N” of the first block, and the system will generate a new block number before the first
block after is pressed.
Note
： After one block is inserted behind the last block and is pressed, t he system will
automatically generate the next block number
.
Example
：
Insert a new block M3 between N0020 and N0030 in Fig. 8 as follows:
(1) Press to move the cursor to N0020 , and press to move the
cursor to the behind of
Z0.0.
(2) Press
，
and the system will automatically generate one block number and blank a
block to display N0022 as Fig. 9. The cursor points to the first input character of the new
block.
(3) Input .
(4) The inserting is completed as Fig. 10.