GSK GSK928TE, Руководство пользователя

Страница: 147 / 187

Programming Appendix
142
10) After the system is turned on, if it runs normally, FLASH chip is checked as the follow
methods to check whether FLASH write is correct. If it wrong, you should check whether the
write switch is correct.
Copy the content of the software U7 to U6
When the system is turned off, the joggle switch is as Fig. 4, you operate it as the above
methods, and then turn off the power supply to set the joggle switch as Fig. 3 and then pull out
the chip in U6.
2. FLASH chip check
1) Enter the initialization window as the above methods.
2) Press “5” to select the step 5, and then select “CHECK” to check the chip (check the running
chip), the system displays “CHECK” and the check result. If the two values are the same of
the result, the system displays “OK”, which indicates that the chip content is correct and the
chip pin is connected correctly. Otherwise, the system displays “ERROR” which indicates
that the chip content is wrong or the chip pin is connected correctly.
3) Press any keys to escape the initialization window.
4) The error chip must be written again, when we run the wrong chip, the unexpected accidence
appears.
Note: The user cannot modify the chip content informally.