GSK GSK928TE, Руководство пользователя

Страница: 34 / 187

GSK928TE
Ⅱ
Turning CNC System User Manual
29
traverse along the selected axis and direction. The slider will stop once the key is released.
The traverse speed will be executed according to the selected rapid traverse speed or feedrate.
Meanings of manual feed direction keys in
JOG mode are as follows:
X negative key
X positive key
Z negative key
Z positive key
Note 1
： Press the feed key in JOG mode, and the slider will traverse when the external spindle
and the feed hold knob are permitted to feed; press the manual feed key, and the
slider does not traverse in the state of feed hold.
Note 2:
Even though the feed key is released, because the system automatically
accelerates/decelerates, the slide will continuously traverse not to stop when the
motor runs rapidly. The actual moving distance is determined by max. speed of the
motor, the acceleration/deceleration time and the feedrate override. The more the
acceleration /deceleration time is and the rapider the speed is, the longer the moving
distance of motor decelerating is, otherwise the moving distance is shorter.
4.4.2 Manual(JOG) Step
In STEP mode, the moving distance of slider each time is preset. The slider will traverse one
setting step in the selected coordinate axis and its direction when the manual feed direction key
is pressed once. When the key is pressed down, the slider feeds as one step until the last step
after it is released. The step width value is displayed with black.
Manual Step feed mode as Fig. 12
：
Fig. 12 Manual step feed mode