GSK GSK928TE, Руководство пользователя

Страница: 62 / 187

GSK928TE
Ⅱ
Turning CNC System User Manual
57
Press the correspond keys to control the spindle starting/stopping when the feed hold knob is
placed to the position 1 and 2; but the spindle cannot be started when it is placed to the position
3.
In AUTO Single mode
When the knob is placed to the position 1, all commands run normally; when it is placed to the
position 2, the control commands for spindle run but the motion commands of X, Z do not run
until the knob is placed to the position 1, when it is placed to the position 3, no blocks run.
In AUTO (Continuous) Run mode
After starting programs, the feed hold knob can be rotated any time to control the spindle and
the slider.
When the knob is placed to the position 1, programs run normally.
When the knob is rotated from 1 to 2, the slider stops and the spindle still keeps the previous
state.
When the knob is rotated from 2 to 3, the spindle stops.
When the knob is rotated from 3 to 2, the spindle restores the previous state.
When the knob is rotated from 2 to 1, the slider starts to run.
The system will automatically escapes from the automatic machining state after
pressing or the reset key in the course of the feed hold and the spindle stopping. The
previous state of spindle and the unfinished commands cannot be reserved. Programs are
restarted if the machining is executed continuously.