GSK GSK928TE, Руководство пользователя

Страница: 159 / 187

Connection Chapter Three CNC Device Connection
154
Connecting ：
+24V
2 11
+24V
0V
10 10
0V
TL+
1 12
JZ
（
CCW
）
TL-
9 13
JF
（
CW
）
T1
3 1
T1 （ No.1 tool ）
T2
11 2
T2
（
No. 2 tool
）
T3
4 3
T3
（
No. 3 tool
）
T4
12 4
T4
（
No. 4 tool
）
CNC side Machine side
GSK 28TE
Ⅱ
Tool post controller
It is recommended that the tool post control line should be connected to CNC by the shield
cable, and the shield and the shell of socket should be connected.
3.5 X5 Feed Drive Unit Interface
GSK928TE
Ⅱ
CNC can match with the reaction stepper motor drive unit, reaction stepper motor
drive unit, AC servo motor drive unit by the motor drive unit interface.
3.5.1. Signal definition
X5 motor (DB15 female)
6：ZD+
7：XEN
8：+5V
5：XD+
4：ZP-
1：XALM
2：+24V
15：ZEN
14：ZD-
12：ZP+
13：XD-
10：0V
9：ZALM
3：XP+
11：XP-
3.5.2 Specification
z Max. pulse output frequency ： 250KHZ
z Pulse length
：
2µs
Pin No. Name Explanation Direction
1 XALM X drive unit alarm input terminal Drive unit → CNC
2 +24V
3 XP+ X pulse positive terminal CNC → drive unit
4 ZP- Z pulse negative terminal CNC → drive unit
5 XD+ X positive terminal CNC → drive unit
6 ZD+ Z positive terminal CNC → drive unit
7 XEN
X enabling （ or amplifier ）
CNC → drive unit
8 +5V
9 ZALM Z drive unit alarm input terminal drive unit → CNC
10 0V +5V GND
11 XP- X axis pulse negative terminal CNC → drive unit
12 ZP- X axis pulse negative terminal CNC → drive unit
13 XD- X negative terminal CNC → drive unit
14 ZD- Z negative terminal CNC → drive unit
15 ZEN Z enabling (or amplifying) CNC → drive unit