GSK GSK928TE, Руководство пользователя

Страница: 22 / 187

GSK928TE
Ⅱ
Turning CNC System User Manual
17
（
5
）
DRY Run key
The cursor moves to the head of block or the head of first word of this block by pressing
continuously.
（
6
）
STEP/JOG mode
The cursor moves to the behind of the last character of this block.
（
7
）
REWRITE key
Switch INSERT/REWRITE mode once when the key is pressed once, and the cursor will
change correspondingly. The cursor in Insert mode is a flashing horizontal line, but that in
Rewrite is a character in flashing highlight.
（ 8 ） When the key is pressed once, the program number with 2-digit is input to create a
new program, select or delete the existing program and all programs.
（ 9 ） PAGE UP Search the program number and display the content of previous page.
(10)
PAGE DOWN
Search the program number and display the content of next page.
(11) Double functions key. Each key has
two definitions. Pressing it once is the first definition value ， namely, U W I K D R. The same
key is pressed again, the system will automatically rewrite the previous input value into the
second definition value, namely / E P N L
. If the same key is pressed continuously, the
input value will be switched between the first definition value and the second one. ‘/’ is the
skip block character
，
‘ ’is the space character.
4.3.1 Searching Directory of Part Program
In EDIT mode, the system displays the program name list of all part programs, all part program
amount and the leftover bytes in the part program memory area of CNC system. In EDIT mode,
the system displays the program name list of all part programs, all part program amount and the
leftover bytes in the part program memory area of CNC system.
Press in EDIT mode or press or when editing programs as Fig. 3: