GILES GEF-400, Руководство по эксплуатации и обслуживанию

Страница: 57 / 115

46
GEF & GEF-VH Series Fryers
Fryer Operation
5.1.6.2 COOL Mode
COOL Mode is an energy-saving feature that changes oil temperature setpoint to a lower
val
u
e. Use to put Fryer into an idle (standby state) during downtime periods.
To enter COOL MODE , press the COOL key. The temperature setpoint will be changed to the
COOL TEMP specified in USER SETTINGS, see Section 5.1.7, Edit User Settings . Factory-
default = 275°F . The setting can be edited by the User in the range of 200°F to 350°F .
5.1.6.3 AUTO-COOL Feature
5.1.6.4 BOIL OUT Mode
IMPORTANT! Fryer must be properly drained, rinsed and prepared for cooking after a Boil Out cycle. See Section
6, Cleaning .
Pressing the BOIL key while Controller is in PREHEAT state enters BOIL OUT Mode .
Temperature and time change to the BOIL TEMP and BOIL OUT TIME , respectively, as
specified in USER SETTINGS (see Section 5.1.7) .
Factory-Default Setting:
BOIL TEMP = 200°F ... editable in the range of 185° to 208°F.
BOIL OUT TIME = 30 minutes ... editable in the range of 1 to 45 mins.
To exit COOL Mode press the [CLEAR] key, then press [<4] to exit COOL
- OR - press [CLEAR] again to continue COOL Mode.
Upon exit, the temperature setpoint will return to the previous active value and
Fryer will enter PREHEAT mode until temperature is reached.
+
Exit AUTO-COOL same as COOL ... press the [CLEAR] key, then press [<4] to exit
COOL - OR - press [CLEAR] again to continue COOL Mode.
Upon exit, the temperature setpoint will return to the previous active value and
Fryer will enter PREHEAT mode until temperature is reached.
+
When the AUTO-COOL feature is turned [ON] , the Fryer automatically enters COOL Mode after no cook cycles are
started within the amount of time specified by the AUTOCOOL TIME setting in USER SETTINGS , s ee Section 5.1.7,
Edit User Settings
Factory-Default Setting:
Feature = [OFF]
AUTOCOOL TIME = 30 ... editable in the range of 1 to 510 mins.