GILES GEF-400 Скачать руководство пользователя страница 71

Страница: 71 / 115

GEF & GEF-VH Series Fryers

Fryer Operation

5.4

Removing Used Waste Cooking Oil from Fryer

. If cooking oil is cold, preheat to 200°F (93°C).

2. Be sure the Power Switch

①

and Selector Switch

②

are both in the

[OFF]

position.

3. Ensure the Filter Pan

③

, with filter media, is in place

and the Quick-Disconnect Hose

④

is connected the

to unit.

4. Slowly turn the Drain Valve Handle

⑤

to the

[OPEN]

position (horizontal) and allow the Fry Pot to

completely drain.

Cooking oil must be replaced regularly to maintain proper cooking characteristics and to continue to produce high

quality food items for the customer. Oil must also be removed prior to performing a Boil-Out Procedure. This

section describes the process for removing and discarding waste oil.
In this section a

Giles Oil Caddy (not included)

is referenced as the waste oil disposal container.

DO NOT attempt to pump or filter cold, congealed oil. The Filter Pump can clog and be

damaged. Oil must be a minimum of 200°F (93°C) before attempting to pump.

Continued on Next Page

Содержание GEF-400




















































































































Результаты поиска

Содержание GEF-400

Отзывы:

Похожие инструкции для GEF-400

Бренды по названию

Популярные бренды

GILES GEF-400, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание GEF-400

Отзывы:

Похожие инструкции для GEF-400

Бренды по названию

Популярные бренды