14
GEF & GEF-VH Series Fryers
Installation
2.11
Changing the Door Swing
Certain situations may require that the door swing direction be reversed to allow easier access to the lower cabinet.
This procedure is described below.
1. Disconnect power.
2. Remove (4) screws
①
on the left side of the lower
cabinet.
3. While supporting door; remove (4) screws
②
holding the top and bottom hinges to the Cabinet;
remove Door.
4. Remove the plastic washer
③
from the bottom
hinge and save.
5. Flip the top-right Hinge
④
, move it to the bottom-
Lief Cabinet side and attach; do not tighten. Place
the plastic Washer
③
on the hinge pin.
6. Flip the Cabinet Door and hang on the bottom-left
Hinge Pin.
7. Flip the bottom-right Hinge
⑤
, move it the top-
left. Insert pin into Door, then attach Hinge to
Cabinet; do not tighten.
8. Check door swing and levelness; adjust as needed
and securely tighten all hinge screws.
9. Install (4) screws removed in Step #2 to fill holes on
right side of the Cabinet.
10. Reconnect power.
11.Order a new
Quick Reference Door Label (Part No.
60802)
*
⑥
and apply over existing label.
1
1
2
2
3
4
5
4
5
3
*6
*
Not shown
Содержание GEF-400
