Geologic ED510, Инструкция пользователя и правила игры

Страница: 4 / 172

4
EN
Dartboard Functions
POWER
switch/button - Located on the lower right corner on the
side of the dartboard. Be sure the AC Adapter is plugged into the
jack on the right side of the dartboard or batteries are installed.
Press the POWER switch to turn game on or off.
START/HOLD button - This multi-function button is used to:

START the game when all options have been selected.

Put dartboard in HOLD status between rounds to allow
player to remove darts from the target area.
GAME GUARD button –After the START button has been
pressed and play has begun, the GAME GUARD feature can
be activated. When the button is pressed, all of the keys will
‘lock’. When GAME GUARD is active, a misguided dart
hitting a button will not affecting your game. To deactivate the
GAME GUARD, simply press the button again and the keys
will unlock.
BOUNCE OUT button - Decide before play if you want to
count darts that do not remain in board (“bounce-outs”) or
not. If not, simply press the BOUNCE OUT button
immediately after a bounce out occurs to deduct the score
that registers
DART-OUT/SCORE button - The DART-OUT feature is
active only during the “01” games (301, 401, etc.). When a
player’s score falls below 160, he/she can press the DART
OUT button to get a suggestion from the dartboard as to the
3 darts needed to finish the game. Note: doubles and triples
are indicated with 2 and 3 dashes to the left of the number
respectively. The SCORE feature allows player to access
score not current on display.
SOUND button – Sound level adjustable from 0-7 levels (8
levels).
DOUBLE/MISS button – This button is used to activate the
Double In/Double Out and Master Out options for the “01”
games. This function is only active when selecting 301, 401,
etc. games. Note: not all models have Master Out option. The
MISS feature is active during play of any game. Press button
to register a “missed” dart. Player can press when dart lands
outside target area so computer registers a thrown dart.
PLAYER/PAGE button – This button is used at the start of
each game to select the number of players you want to play
the game. In addition, this button allows players to see other
player scores of not on active display. LCD dartboard keeps
track of scores for up to 8 players or up to 4 two-person
teams. LED dartboard keeps track of scores for up to 16
players or up to 8 two-person teams.
GAME button – Press to page through the on-screen game
menu and select game.
SELECT button – Press to select various difficulty settings for
games. Many games contain several difficulty options that
can be accessed by pressing this button
RESET button – Press to clear display and reset dartboard to
opening sound.
CYBERMATCH button – This exciting feature allows single
player to play against the computer at one of five different
levels of skill! Only 1 player can complete against the
Cybermatch competitor at a time. The Cybermatch feature
adds a level of competition to normally routine practice
sessions.
Cybermatch Skill Levels
Level 1 (C1)
Professional
Level 2 (C2) Export
Level 3 (C3) Advanced
Level 4 (C4) Intermediate
Level 5 (C5) Beginner
Press to activate Cybermatch feature where you can play
against the computer and then press START. When play
begins: the ‘human’ player throws first. After 3 darts art
thrown, go to the board to take darts out and press START to
change the next player (Cybermatch). Watch as the
Cybermatch opponent’s dart scores are registered on the
display. The dartboard will indicate the segment the
Cybermatch opponent is throwing for the in Active Score
Display (the ATTEMPT LED will light). Then the Active Score
Display will indicate the segment that the Cybermatch
opponent actually scored (the RESULT LED will light).
After the Cybermatch opponent completes his round, the
board will automatically reset for the ‘human’ player. Play
continues until one player wins. GOOD LUCK!
.
Electronic Dartboard Operation
1. Press the POWER or switch to ON position (|) to activate
dartboard. A short musical introduction is played as the
display goes through power-up test.
2. Press
GAME button until desired game is displayed – or
press any of the QuickPick buttons.
3. Press
DOUBLE button (optional) to select starting and/or
ending on doubles or Master Out (used only in 301 - 901
games). This is explained in the game rules section.
4. Press
PLAYER button to select the number of players (1, 2
... 16). The default setting is 2 players. Or select Cybermatch
option by pressing CYBERMATCH button.
5. Press
START/HOLD button (red) to activate game and
begin play.
6. Throw darts: When all 3 darts have been thrown, a voice
command will indicate “Remove Darts” and the score will
flash. The darts can now be removed without affecting the
electronic scoring. When all darts are removed from the
playing surface press the
START button to go to next player.
Voice command will indicate which player is up. Also, the
player indicator lights will illuminate to show which player’s
turn it is.
GAME 1: 301
This popular tournament and pub game is played by
subtracting each dart from the starting total until the player
reaches exactly 0 (zero). If a player goes past zero it is
considered a “Bust” and the score returns to where it was at
the start of that round. For example, if a player needs a 32 to
finish the game and he/she hits a 20, 8, and 10 (totals 38),
the score goes back to 32 for the next round.
In playing the game, the double in / double out option can be
chosen (double out is the most widely used option). Simply
press the “DOUBLE” button to change this setting. LED
indicators will display your current setting: Note: you can
adjust total score of this game.
• Double In - A double must be hit before points are