SCIP Configuration
Initializing the SCIP
3-4
SpectraComm IP T1 Router Card
076R200-000
Installation and Operation Manual
Issue 13
Configuring CLI User Privileges
SCIP controls access to the CLI through its three access modes: USER, SUPERVISOR and
ADMIN. The password-protected
enable
command sets the access from user mode to
supervisor or admin mode, depending on the password entered. The command prompt suffix
character identifies the mode you are currently in:
•
For USER mode, the prompt string ends in
>
Commands in USER mode allow viewing but not changing configuration data.
•
For SUPERVISOR mode, the prompt string ends in
#
Commands in SUPERVISOR mode allow USER access plus the ability to change
configuration data, reboot the unit, manipulate flash files and enable the TFTP server for file
downloads.
•
For ADMIN mode, the prompt string ends in
%
Commands in ADMIN mode allow SUPERVISOR access plus the ability to set up and modify
user accounts for usernames and passwords. ADMIN mode also allows authentication for the
CRAFT
port to be turned on or off, and administers local and authentication.
Note
Some ADMIN mode configuration commands (i.e., enabling the craft port or setting up user accounts)
cannot be accessed or executed via the web-based CLI.
Note
Up to 20 usernames/passwords may be specified. The Default Username is
gdc
; In User mode, the Default
Password is
gdc
; Supervisor mode password is
supervisor
; Admin mode password is
admin
.
Note
Local authentication is conducted via usernames and passwords configured in the SCIP. You can also
configure SCIP for authentication which employs usernames and passwords residing on a
server. Refer to Chapter 5, under the paragraphs on
.
Setting Up User Accounts
1. Type
disable
to turn off the supervisor access.
2. Turn Admin mode on by typing
enable
and entering the
admin
password. The command
prompt will now contain the
%
character.
3. Modify default admin and supervisor accounts by typing:
configure accounts add admin
[new admin password]
configure accounts add supervisor
[new suprv password]
4. For as many users as required, add a user account and password by typing:
configure accounts add
[name] [password]
Содержание SpectraComm IP T1
Страница 119: ......
Страница 120: ...The Best Connections in the Business...