General DataComm SpectraComm IP T1, Руководство по установке и эксплуатации

Страница: 45 / 120

Installation & Connections Modem Connectivity
076R200-000 SpectraComm IP T1 Router Card 2-17
Issue 13 Installation and Operation Manual
Callback Mode of Operation
The following procedure allows Microsoft DialUp Networking to auto-answer and start up a PPP
session with SCIP in callback mode. Perform all of the step in the order given.
1. Configure DialUp Networking to open a terminal window after dialing.
2. Set up the DialUp Networking Configure->Connection->Advanced “Extra Settings” string as
follows:
&COS0=1
3. SCIP can be configured with up 20 phone numbers, each requiring a callback location name.
To add a callback number, type:
configure modem callback add
[“location name”] [phone-number]
To delete a callback number, type:
configure modem callback delete
[“location name”]
4. Dial into SCIP.
5. Login using a valid username and password.
6. Select a callback location from the displayed list. SCIP will hang up.
7. After a delay of 30 seconds, SCIP will call the selected location.
8. After the connection is made, select
PPP
or
Console Shell
from the menu.
9. If DialUp Networking is selected, SCIP will initiate a PPP session.
10. When the workstation terminal window shows non-printable characters, click the terminal
window
Continue
button or press
F7
.
11. PPP will negotiate a session, give the workstation its IP address and establish the PPP link.
12. Once the PPP connection is made, Telnet, HTTP, etc., may be used from the workstation.
13. If
Terminal Emulation
is selected, the following message is displayed:
SC-IP CONSOLE session in progress.
Override (y/n)?
Entering
y
will cause any current SCIP console session to be terminated, and will start the
Terminal Emulation console session.