Installation & Connections
Overview
2-2
SpectraComm IP T1 Router Card
076R200-000
Installation and Operation Manual
Issue 13
Unpacking Instructions
The SCIP card and components are shipped in shock-absorbent packing within a corrugated box.
lists the standard SCIP equipment. Some components will not be required/supplied for
your network installation. Remove each component from the box and perform a thorough
inspection. If any component appears damaged, contact the shipper immediately. All damaged
components must be retained until an inspection by the shipper has been completed. If necessary to
re-package and return the unit, use the original box and packing material.
Note
For cable part numbers, the -XXX designation refers to cable length, in feet.
SCIP Equipment
Note
To connect the SCIP to a SC-ES device or to a server, use the straight-thru cable (S-078H010-XXX). In a
daisy-chain network configuration, use the crossover cable (S-078H011-XXX) to make the SCIP-to-SCIP
connection. Refer to the paragraph on
for details.
Table 2-1
SCIP Equipment
Part Number
Description
Connectivity
076P032-001
SpectraComm IP T1 rackmount card
In any shelf or
enclosure:
LAN, T1/FT1
(PPP, Ethernet)
076M032-001
SpectraComm IP T1 rackmount card w/modem
076A032-001
SpectraComm IP T1 card in RA1000 AC Enclosure (100-240V)
076A032-006
SpectraComm IP T1 card in SC1002 DC Enclosure (+24/-48 V)
076A032-212
SpectraComm IP T1 card in SC1012 DC Enclosure (+10/+18 V)
010M180-009
SpectraComm IP T1 card in SC/DC Blade Adapter
076A032-011
SpectraComm IP T1 card w/modem in RA1000 AC Enclos. (100-240V)
076A032-016
SpectraComm IP T1 card w/modem in SC1002 DC Enclos. (+24/-48V)
076U032-D##
Factory-installed Default Configuration Profile (01-99)
Router or LAN-X modes
022H024-XXX
Cable, 8-pin modular to 8-pin modular straight-thru
T1 (Network Port)
027H266-XXX
Cable, 8-pin modular to 8-pin modular, crossover
T1 (Network Port)
S-078H010-XXX
Cable, CAT5 UTP straight-thru (ETH LAN or Sync/Async ports)
Sync/Async Port and/or
LAN (ETH) Ports 1 & 2)
S-078H011-XXX
Cable, CAT5 UTP crossover (ETH LAN ports only)
830-128-8XX
Cable, 8-pin modular to 8-pin modular
Craft Port
029H210-001
Adapter, RS232-RS561 DB25M to 8-pin modular
Craft Port
029H211-001
Adapter, RS232-RS561 DB9 M to 8-pin modular
Craft Port
209-036-036
Adapter, DB25M to 8-pin modular (configured as S1 or AUX1 port)
Sync/Async Port
209-036-035
Splitter Adapter, 8-pin modular to two 8-pin modular plugs
(T1/Modem Line Port)
024H142-007
Cable, 6-pin RJ11 to 8-pin modular
Internal Modem
(T1/Modem Line Port)
209-036-034
025H502-004
025H503-004
025H504-004
Harmonica Block, 50-pin to 8-port 8-pin modular
Cable, DTE Interface, shielded DB25M to 50-pin amphenol
Cable, DCE Interface, shielded DB25M to 50-pin amphenol
Cable, CISCO console, shielded DB25M to 50-pin amphenol
Term Serv Port
or Contact Sense Port
025H001-025
DB25 M to wirewrap (25 ft)
Contact Sense Port
209-036-020
027H626-002
Harmonica Block, 50-pin to 6-port 8-pin modular
Cable, 50-pin F to 50-pin M for mass term shelf
T1/AUX Port
Содержание SpectraComm IP T1
Страница 119: ......
Страница 120: ...The Best Connections in the Business...
