Diagnostics & Monitoring
Monitoring Features
6-8
SpectraComm IP T1 Router Card
076R200-000
Installation and Operation Manual
Issue 13
System Message Log
The System Message log shows a history of the last 100 SYS MSG events saved to the log. This
log is useful in examining link status, spanning tree protocol changes, diagnostic test activity, MAC
security violations, failures, etc. The System Message log is not saved when the unit
reboots. Each log message is time-stamped with a relative System Up Time (default) or with GMT,
if so configured. Refer to Chapter 5 under the paragraphs on
as needed.
•
To show the last 100 logged events, type:
show log sysmsg
•
To clear the log, type:
clear log sysmsg
Figure 6-9
Example: System Message LogExample: System Message Log
Alarm Log
The Alarm log shows a history of the last 100 Alarm events saved to the log. The Alarm log is not
saved when the unit reboots. Each log entry is time-stamped with a relative System Up Time
(default) or with GMT, if so configured. Refer to Chapter 5 under the paragraphs on
as needed.
•
To show the last 100 logged alarms, type:
show log alarm
•
To clear the log, type:
clear log alarm
Figure 6-10
Example: Alarm Log
SYS MSG Log in reverse chronological order
### -----------------------------Description------------------------------
5: serial0 T1 is DOWN (SysUp 0 days 0 hours 0 mins 5 secs)
4: etherswitch port 2 link DOWN (SysUp 0 days 0 hours 0 mins 0 secs)
3: etherswitch port 1 link DOWN (SysUp 0 days 0 hours 0 mins 0 secs)
2: ethernet0 line protocol set to UP (SysUp 0 days 0 hours 0 mins 0 secs)
1: SYS MSG logging started (SysUp 0 days 0 hours 0 mins 0 secs)
Alarm Log in reverse chronological order
### -----------------------Description------------------------------------
3: Contact alarm logging started (GMT 18:51:21 1/27/2010)
2: Contact sensing started (GMT 18:51:21 1/27/2010)
1: Alarm logging started (SysUp 0 days 0 hours 0 mins 0 secs)
Содержание SpectraComm IP T1
Страница 119: ......
Страница 120: ...The Best Connections in the Business...