General DataComm SpectraComm IP T1, Руководство по установке и эксплуатации

Страница: 72 / 120

The Web Interface Introduction to SCIP Web Management
4-2 SpectraComm IP T1 Router Card 076R200-000
Installation and Operation Manual Issue 13
Starting A Web Session
To start a web management session, type the IP address of a SCIP unit or type the host name at any
browser. The following login authorization screen appears:
User Name and Password
The SCIP web interface is protected by pre-configured user names, passwords and the associated
access privileges as assigned by an Administrator. A valid password can be up to 20 alphanumeric
characters.
Access Modes
Access modes configured by the Administrator will determine whether a user name has Read-only
or Read-Write privileges to the SCIP web screens.
• User Mode
(Read Only access)
• Supervisor Mode
(Read/Write access permits data entry and configuration changes.)
• Admin Mode - Access Denied
(Admin commands must be entered via Telnet or Craft interface.)
Note
Access will be denied to any user or supervisor if there are already eight web sessions in progress.
Login
Username:
Password:
Supervisor password:
(optional)