General DataComm SpectraComm IP T1, Руководство по установке и эксплуатации

Страница: 67 / 120

SCIP Configuration Terminal Server Management
076R200-000 SpectraComm IP T1 Router Card 3-21
Issue 13 Installation and Operation Manual
Telnet/SSH Menu Cut-thru
This procedure allows authorized users password-protected menu access to enabled terminal server
ports and the SCIP’s command line interface.
1. Ensure that the SCIP has been configured for remote port management via the Telnet/SSH
Menu as described in Setting Up SCIP .
2. Start a Telnet/SSH session by defining the appropriate connection parameters:
telnet
[SCIP IP address] or
ssh
[SCIP IP address]
3. Login to the SCIP with supervisor or admin privileges. A successful Telnet/SSH connection to
the SCIP will display the Telnet/SSH menu, as shown in the example below..
Figure 3-5 SCIP Telnet Menu Selections
4. The Telnet/SSH menu can have up to eight enabled terminal server ports.
• Select menu options
1
thru
8
to access any enabled Terminal Server port.
• Select menu option
0
or
9
to access the SCIP’s command line interface.
5. When finished, disconnect the session or exit the Telnet/SSH client.
6. To manage another terminal server device, start a new Telnet/SSH session.
******************************* SCIP TELNET MENU ******************************
SNMP SysName: Central Control
System Prompt: Sector 1
------------------------------------------------------------------------------
Enabled Terminal Server Ports
------------------------------------------------------------------------------
1 SCM craft port
2 SCES 9-port
3 Controller #1
4 Controller #2
5 router #1
0 or 9 SCIP Command Line Interface
Selection: