The Web Interface
Introduction to SCIP Web Management
076R200-000
SpectraComm IP T1 Router Card
4-3
Issue 13
Installation and Operation Manual
Command Line Web Screen
Commands entered at the Command Line web screen operate exactly the same as at the telnet or
terminal CLI interface. The Command line web screen displays a series of tables that allow users
and supervisors to execute commands and associated arguments by clicking on the links in the table.
The top level command menu is shown below.
•
When you click a command from the menu, any required arguments for that command appear.
•
To return to the command line top menu from any argument screen, use your web browser’s
Back
button, the SCIP Command Line selection, or click the
Top Menu
link at the bottom
of an argument table.
•
For a detailed guide to CLI, click on the
help
menu item. A table of command default settings
is also provided in Appendix A,
.
Note
Supervisor Access is required for
configure
and
reboot
commands; thus, with User Access these
commands will not be displayed.
Configuration commands that are restricted to ADMIN mode will not be displayed. You must logout of the
web interface and make a Telnet or terminal connection in ADMIN mode to access/execute those commands.
Table 4-1
Command Line Web Screen
Field
Description
clear
Displays a selectable list of sub-commands that will clear arp-cache entries and counters on
one or more ports.
configure
(Supervisor Access Only)
Displays a selectable list of sub-commands that are used to configure parameters for SCIP’s
Frame Relay, Interfaces, Static IP Routing mode, LAN-extension mode, Modem, SNMP, T1
and Terminal Server.
help
Displays a read-only display describing online help, the command access modes, some
common sub-commands and arguments, and information on downloading configuration batch
files.
show
Displays a selectable list of sub-commands that show SCIP status and several operating,
configuration and network parameters.
reboot
(Supervisor Access Only)
Halts SCIP operation and performs a reboot using existing configuration.
netstat
Displays local, remote IP addresses, state and statisitics on current TCP socket connections.
services
Displays the status of HTTP, SNMP, SSH, FTP, TELNET and TFTP services
as Enabled or
Disabled
.
logout
Ends this web session.
YOUR SYSTEM NAME (172.16.10.193)
clear
configure
help
show
reboot
netstat
services
logout
Reset functions
Configure system parameters
Description of the command line interface and help system
Show system parameters
Halt and perform a reboot
Show TCP socket connections
Show/Enable/Disable HTTP, SNMP, SSH, TELNET, TFTP & FTP Services
End this web session.
Содержание SpectraComm IP T1
Страница 119: ......
Страница 120: ...The Best Connections in the Business...