manualshive.com logo in svg

GE Multilin 850, Инструкция по эксплуатации

Инструкция по эксплуатации GE Multilin 850 - это необходимое руководство для пользователей, которые хотят максимально эффективно использовать этот продукт. Вы можете загрузить ее бесплатно с нашего сайта. Путем ознакомления с руководством пользователи смогут освоить все функции и возможности устройства. Посетите наш сайт для скачивания.

Поделиться
Скачать
background image

CHAPTER 4: ABOUT SETPOINTS

COMMON SETPOINTS

850 FEEDER PROTECTION SYSTEM – INSTRUCTION MANUAL

4–3

Common Setpoints

To make the application of this device as simple as possible, similar methods of operation 
and similar types of setpoints are incorporated in various features. Rather than repeat 
operation descriptions for this class of setpoint throughout the manual, a general 
description is presented in this overview. Details that are specific to a particular feature are 
included in the discussion of the feature. The form and nature of these setpoints is 
described below.
•

FUNCTION setpoint

: The 

<ELEMENT_NAME> FUNCTION

 setpoint determines the 

operational characteristic of each feature. The range for this setpoint is: “Disabled”, 
“Trip”, “Alarm”, “Latched Alarm”, and “Configurable”.
If the 

FUNCTION setpoint

 is selected as “Disabled”, then the feature is not operational.

If the 

FUNCTION setpoint

 is selected as “Trip”, then the feature is operational. When 

the “Trip” function is selected and the feature operates, the output relay #1 “Trip” 
operates, and the LED “TRIP” is lit.
If the 

FUNCTION setpoint

 is selected as “Alarm” or “Latched Alarm”, then the feature is 

operational. When this function is selected, and the feature operates, the LED “ALARM” 
is lit, and any assigned auxiliary output relay operates. The “Trip” output relay does 
not operate, and the LED “TRIP” is not lit.
When 

Alarm

 function is selected and the feature operates, the LED “ALARM” flashes, 

and it self-resets when the operating conditions are cleared.
When 

Latched Alarm

 function is selected, and the feature operates, the LED “ALARM” 

will flash during the operating condition, and will be steady lit after the conditions are 
cleared. The LED “ALARM” can be reset by issuing reset command.
If the 

FUNCTION setpoint

 is selected as “Configurable”, the feature is fully operational 

but outputs are not driving any action, such as output relay #1, Alarm LED or anything 
else. Operands from this element must be programmed to a desirable action which 
may be as simple as the auxiliary output relay from the list of available relays in the 
element itself, FlexLogic, Trip Bus etc.

NOTE

NOTE: 

The FlexLogic operands generated by the operation of each feature are active, and 
available to assign to outputs, or use in FlexLogic equations, regardless of the selected 
function, except when the function is set to “Disabled”.

•

PICKUP

: The setpoint selects the threshold equal to or above (for over elements) or 

equal to or below (for under elements) which the measured parameter causes an 
output from the measuring element.

•

PICKUP DELAY

: The setpoint selects a fixed time interval to delay an input signal from 

appearing as an output.

•

DROPOUT DELAY

: The setpoint selects a fixed time interval to delay dropping out the 

output signal after being generated.

•

TDM

: The setting provides a selection for Time Dial Multiplier which modifies the 

operating times per the selected inverse curve. For example, if an IEEE Extremely 
Inverse curve is selected with TDM=2, and the fault current is 5 times bigger than the 
PKP level, operation of the element can not occur before an elapsed time of 2.59 s 
from Pickup.

•

OUTPUT RELAYS

: The 

<ELEMENT_NAME> RELAYS 

setpoint selects the relays required 

to operate when the feature generates an output. The range is “Operate” or “Do Not 
Operate”, and can be applied to any combination of the auxiliary output relays. The 
default setting is “Do Not Operate”. 
The available auxiliary relays vary depending on the order code.

Содержание Multilin 850

























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Multilin 850

Zenith D60WLCD Series Service Manual preview
D60WLCD Series
Бренд: Zenith Страницы: 88
P.Lindberg 9058322 Original Manual preview
9058322
Бренд: P.Lindberg Страницы: 41
Taga Harmony PF-DC Series Instruction Manual preview
Harmony PF-DC Series
Бренд: Taga Страницы: 12
Philips ACM067 User Manual preview
ACM067
Бренд: Philips Страницы: 140
lubrizol BlazeMaster Installation Manual preview
BlazeMaster
Бренд: lubrizol Страницы: 8
ABB POLIM-R Operating Instructions Manual preview
POLIM-R
Бренд: ABB Страницы: 15
ABB Relion REG670 Product Manual preview
Relion REG670
Бренд: ABB Страницы: 146
SMA SSM-U-COMOVP Installation Manual preview
SSM-U-COMOVP
Бренд: SMA Страницы: 136
SMA DC SPD KIT6-10 Quick Reference Manual preview
DC SPD KIT6-10
Бренд: SMA Страницы: 144
RED SHIELD WS100G2 User Manual preview
WS100G2
Бренд: RED SHIELD Страницы: 12
Pentair Pool Products Pentek SPP-235P Installation Instructions Manual preview
Pentek SPP-235P
Бренд: Pentair Pool Products Страницы: 12
nvent LANRJ45C6P Instruction Sheet preview
LANRJ45C6P
Бренд: nvent Страницы: 2
nvent ERICO System 3000 Installation, Operation And Maintenance Manual preview
ERICO System 3000
Бренд: nvent Страницы: 56
Horizont 15498C Operating Instruction preview
15498C
Бренд: Horizont Страницы: 4
akira PTV-43H08 Service Manual preview
PTV-43H08
Бренд: akira Страницы: 67
akira PTV-50H08 Service Manual preview
PTV-50H08
Бренд: akira Страницы: 67

Бренды по названию

Популярные бренды

Загрузить еще бренды