GCC Technologies S290LS Series, Руководство пользователя

Страница: 104 / 148

232001410G(10)
100
5.2.3.4 LaserPro S290LS Print Driver >> Paper Page
ġ
Paper Size (Paper Page)
The paper size represents your total work area. Ensure that the paper size is never set
greater than the S290LS work table area of 25" x 18" (640 mm x 460 mm) or 29" x 18" (740
mm x 460 mm) with the Extend option checked. The X value represents the length and the
Y value represents the width.
Unit (Paper Page) [DEFAULT SETTING: Metric (mm)]
Here you can set your preferred measurement standard in which you would like to use with
the
LaserPro S290LS print driver. You can choose between metric or imperial standards.
Image Tuning (Paper Page) [DEFAULT SETTING: 0]
In the event that you are processing extremely fine and detailed designs requiring near-
microscopic edge-to-edge precision, you will need to adjust the image tuning setting. To
adjust this setting, we recommend that you engrave a small black square design as a sample
and use a magnifying glass to view the engraved results.
When you look at your engraved test square under a magnifying glass, you may notice the
edges of your square may be slightly offset, with every consecutive engraved even or odd
line protruding past the square’s ideal edge. This occurrence may occur on the left or right
side of the square and can be compensated for by the image tuning setting. In the diagram
below, the arrows refer to the direction the laser head is moving to generate that engraved
line. If the first and every other line protrude to the
left
of the square’s ideal edge, you will
want to set the image tuning to a
negative value
. If the first and every other consecutive line
protrude to the
right
of the square’s ideal edge, you will want to set the image tuning to a