GCC Technologies S290LS Series, Руководство пользователя

Страница: 77 / 148

232001410G(10)
73
Set Standby Mode Page>> Machine Setting Page
Navigating to this page:
Main Work Page
press F4
Functions Page
Select<
Machine
Setting
>from the menu
Machine Setting Page
Select<
Set Standby
Mode
>from the menu
Set Standby Page
The Set Standby Mode page allows you to configure the laser machine automatically enter into
power saving if machine is idle for a specified time.
When entering into the Set Standby Mode function, you can use Left or Right arrow keys to scroll
between <Enable> or <Disable> the function. The Time function is to determine after how long
the laser machine is idle, it will enter in power saving automatically. The default time is 4 minutes.
The Enter Standby function will turn the machine into power saving immediately after selected.
• Standby: Enable/ Disable
• Time: 4-30 mins. (Default 4 mins.)
• Enter Standby: YES/ NO
Standby Mode Page
Relevant Buttons Function
F1 (Back) Back to previous page
F4 (Save) Save your current settings
Y
/
Z
Directional Cycle standby mode between YES / NO
Start / Stop Back to Main Work Page
Auto Focus Initiate the auto focus function
U
/
V
Directional Scroll between menu options
S
/
T
Manual Focus Buttons
Manually adjust the height of the work table (Z-
axis)