GCC Technologies S290LS Series, Руководство пользователя

Страница: 54 / 148

232001410G(10)
50
5.1.3 Graphic Control Panel Overview
The Control Panel
The control panel on the LaserPro S290LS provides an easy access to all the manual
controls needed for cutting and engraving. The liquid crystal display (LCD), functional,
directional and selection buttons make navigating through the machine’s manual
controls easy to do.
LED Indicator Lights
Three indicator lights on the LaserPro S290LS control panel are part of the system’s
safety interlock system.
•
Door -
The door light will illuminate when either the top lid or external pass through doors on the
LaserPro S290LS are open or improperly closed.
•
Power -
The power light will illuminate when the LaserPro S290LS is powered on.
•
Laser -
The laser light will illuminate when the laser is active and in operation.
WARNING
• DO NOT attempt to remove or modify any component of the safety interlock system.
• If at any time, any of the access doors are open and the “laser” LED is illuminated,
unplug the laser system IMMEDIATELY and contact GCC technical support for service
instructions.
• DO NOT operate the laser system if any component of the safety system is
malfunctioning.
LED Indicator Light
LCD Display Screen
Functional Buttons
Directional and Hot-
key Buttons