GCC Technologies S290LS Series, Руководство пользователя

Страница: 43 / 148

232001410G(10)
39
6) The next screen will prompt you with a list to select the manufacturer and model of your printer.
From this menu, click
Have Disk
. Another menu will now pop up for you to indicate the location
of the print driver. With the LaserPro CD still in your drive, click
Browse,
select the LaserPro
S290LS driver folder and locate the GLXXX.inf file. Click
OPEN
to have S290LS displayed as a
valid printer.
7) Now select S290LS from the list of printers (S290LS should be the only printer
displayed on the list) and click
Next
to continue.
8) If a screen comes up informing you of the detection of a previous driver and asks to keep the
existing driver or use the new one, select <
Replace Existing Driver
> and click
Next
to
continue.
9) This screen will prompt you to provide a printer name. Simply type in <
S290LS
> and select
Yes
or
No
if you want to use this printer as the default printer and click
Next
to continue.
.
NOTE
,
10) At the Printer Sharing screen, select <
Do not share this printer
> and click
Next
to continue.
11) Select <
No
> when asked if you want to print a test page and click
Next
to continue.
12) Now simply click
Finish
to complete the Add Printer Wizard.
13) Now the installation will proceed, if you get a Hardware Warning about the software you are
installing for this hardware has not passed Windows Logo testing, simply click
Continue
Anyway
to ignore this warning.
14) Congratulations, your printer driver has been successfully installed!
NOTE
When working with the LaserPro S290LS Print Driver within your graphics software, you
will need to have the S290LS set as the default printer to get proper output. If you select
to not have the S290LS be the default printer, please remember to manually change this
on your own from within the graphic software printer selection area or from the Windows
Æ
Control Panel
Æ
Printers and Faxes section.