GCC Technologies S290LS Series, Руководство пользователя

Страница: 76 / 148

232001410G(10)
72
Vector Mode Page>>
Machine Setting Page
Navigating to this page:
Main Work Page
press F4
Functions Page
Select<
Machine
Setting
>from the menu
Machine Setting Page
Select<
Set Vector
Mode
>from the menu
Vector Mode Page
The Accel. (Acceleration) function modifies the acceleration and deceleration of the X and Y rails
to adjust and balance vector mode’s quality and speed settings based on your specific job.
<Speedy> mode offers the highest output speed while sacrificing certain degree of quality.
Whereas <Quality> mode offers the highest quality, sacrificing output speed. Keep in mind that
speed and quality are usually a trade-off.
Select Smoothing function to <YES>, the laser machine will smooth out the curve path, result in
smooth edge, higher speed, while less precise in scale factor, whereas setting Smoothing to
<NO>, the curve will move in more precision scale, less smooth path, and slower speed.
• Acceleration Modes: Quality, Production, Speedy
[Slower speed/ higher quality Faster speed/ lower quality]
• Smoothing: YES/ NO (default: YES)
Tip
Enable Smoothing will be most evident when processing small, fine,
intricate designs which request to run in high speed. We recommend you
leave Smoothing to <YES> when cutting such designs. Disable the
Smoothing when precise output scale is required.
Vector Mode Page
Relevant Buttons Function
F1 (Back) Back to previous page
F4 (Save) Save your current settings
ː
/
˒
Directional
Cycle through Vector Mode Settings
Y
/
Z
Directional
Cycle between options and YES / NO
Start / Stop Back to Main Work Page
Auto Focus Initiate the auto focus function
Ÿ
/
ź
Manual Focus Buttons Manually adjust the height of the work table (Z-axis)