GCC Technologies S290LS Series, Руководство пользователя

Страница: 85 / 148

232001410G(10)
81
5.2 The LaserPro S290LS Print Driver
With the LaserPro S290LS print driver successfully installed, you will need to adjust the printer and page
size default settings before you can begin editing and completing jobs. By doing so, you will be setting the
work area in your graphics software to match the LaserPro S290LS work table area.
NOTE
Please make sure the LaserPro S290LS is set to the default printer before proceeding
to the page and layout setup.
Ensure that the LaserPro S290LS has been selected as the DEFAULT PRINTER. You can do so by
going into your Windows Control Panel
ĺ
Printers and Faxes.
If the LaserPro S290LS is not selected as DEFAULT PRINTER, you may set it up through the graphics
software as well. The following example takes CorelDRAW to demonstrate how to set up LaserPro
S290LS as the Printer.
1) From the primary menu, click FILE
ĺ
PRINT SETUP.
2) From the navigation bar Name, click S290LS
ĺ
OK
5.2.1 Page Setup and Orientation
The first thing you must do before working with the LaserPro S290LS Print Driver will be to make
sure the page and layout settings are properly configured within your graphics software. You will
need to access and edit the Page Setup or Layout page of your graphics software to set your
graphics software’s page layout to match the work table’s dimensions and orientation.
From your graphic software’s Page Setup page:
• Set the page orientation in the graphics software to Landscape mode.
• Set page size horizontal length to 640 mm (25 inches) or 740 mm (29 inches) and
vertical height to 460 mm (18 inches).