GCC Technologies S290LS Series, Руководство пользователя

Страница: 55 / 148

232001410G(10)
51
Directional and Selection Buttons
Function (F1 / F2 / F3 / F4) –
Four function buttons allow you to select various functions which
will change depending on what section of the menu you are in. Each function button’s
corresponding task will be displayed right above its respective button on the LCD display screen.
Please note that in certain menus, not every function button will always be mapped to a
corresponding action. In these situations, that particular button will not have a function.
Directional ( / / / ) –
Four directional buttons allow you to navigate the selection cursor
through the control panel menu and adjust the value of specific settings. In general, the
/
directional buttons cycle through the various selections, while the
/
directional buttons
adjust the value of that particular selection.
Enter –
Confirms the current selection.
Start / Stop –
Allows you to start or stop engraving jobs, once those jobs have been successfully
loaded onto the system.
Delete –
Provides quick access to delete the current job.
Pause –
Pauses the current engraving process. Press again to resume the current process.
Auto Focus –
After you have positioned your material and moved the laser carriage head to the
area you want to engrave, press this button and the system will automatically adjust the optimal
vertical focal distance for the laser.
Manual Focus ( Ÿ / ź ) –
To manually adjust the vertical focal distance between the laser head
and the material, you can use the
Ÿ
/
ź
buttons to do so. Doing so will adjust the vertical height
(z-axis) of the worktable.