Foma N903i, Руководство пользователя

Страница: 565 / 580

48
AT+CLIR= n Sets whether or not to
notify the other party of the
phone number when
originating a 64K data
communication call. n = 0 : Complies to the CLIR service contract.
n = 1 : Not notify the other party of the
caller’s phone number.
n = 2 : Notify the other party of the caller’s
phone number (initial value).
AT+CLIR?
：
Displays the current setting.
+CLIR:
n
,
m
m
=0 : CLIR is not started (Caller ID is
always sent)
m
= 1 : CLIR is started (Caller ID is always
not sent)
m
= 2 : Unknown
m
= 3 : CLIR temporary mode (default is not
notify)
m
=4 : CLIR temporary mode (default is
notify)
AT+CLIR=0
OK
AT+CLIR?
+CLIR:0,1
OK
AT+CLIR=?
+CLIR:(0-2)
OK
AT+CMEE= n
[&F] [&W]
Sets whether the error
report of the FOMA
terminal is present. n = 0 : Use the ERROR result (initial value).
n = 1 : +CME ERROR:<err> result code is
used, and a numeral value is used
for <err>.
n = 2 : +CME ERROR:<err> result code is
used, and characters are used for <err>.
AT+CMEE?
：
Displays the current setting.
The command displayed on the right is the
execution example for cases when there is a
FOMA terminal problem or a connection error.
+CME ERROR result code is as follows.
1
：
no connection to phone
10
：
SIM not inserted
15
：
SIM wrong
16
：
incorrect password
100
：
unknown
AT+CMEE=0
OK
AT+CNUM
ERROR
AT+CMEE=1
OK
AT+CNUM
+CME ERROR:10
AT+CMEE=2
OK
AT+CNUM
+CME ERROR:SIM not
inserted
AT+CNUM Displays the own number of
the FOMA terminal. Result: +CNUM:,<number>,<type>
number: phone number
type
: 129 or 145
129 ： International access code (+) is not
included.
145
：
International access code (+) is
included.
AT+CNUM
+CNUM:,“+8190XXXX
XXXX”,145
OK
AT+COPS Selects the network
operator to connect. Format : AT+COPS=<mode>,2,<oper>
mode=0 : automatic (searches the network
and switches the network operator
automatically)
mode=1 : manual (connects to the network
operator specified in <oper>)
mode=2 : Disconnects the connection to the
network operator
mode=3 : Mapping is not performed.
mode=4 : manual/automatic (if the
connection to the network operator
specified in <oper> fails, works as
automatic mode.)
<oper> is a hexadecimal value which
consists of Country code (MCC) and
Network code (MNC). The format is as
follows:
Digit 1 of MCC
･･･
octet 1 bits 1 to 4
Digit 2 of MCC ･･･ octet 1 bits 5 to 8
Digit 3 of MCC ･･･ octet 2 bits 1 to 4
Digit 3 of MNC ･･･ octet 2 bits 5 to 8
Digit 2 of MNC
･･･
octet 3 bits 5 to 8
AT+COPS=0
OK
AT+COPS?
+COPS:0
OK
AT+COPS=?
+COPS:(2,,,“44F001”),
(3,,,“44F002”),,(0,1),(2)
OK
AT command Outline Parameter/description Command execution example