Foma N903i, Руководство пользователя

Страница: 50 / 580

48
Getting Started
<Initial setting>
Performing Initial Settings
After turning a FOMA terminal on, set “Set time”, “Change security code”, “Character size”, “Permit to
send loc.”, “Keypad sound”, “Neuropointer” (“Simple” only) and “PushTalk Caller ID” as initial settings.
d
If you have set any of the functions, the function’s setting screen does not appear.
d
After Steps 1 to 8 are performed, the initial setting screen no longer appears. Even if you perform “Reset
settings” after those initial settings are completed, the initial setting screens do not appear.
d
When “PIN1 code entry set” is set to “ON”, the PIN1 code entry screen appears after you turn a FOMA
terminal on. Enter the correct PIN1 code to show the initial setting screens.
→
p.156
1
Initial setting screen
X
“YES”
2
Set time
Date and time are not set by default. Setting time
→
p.49
3
Change the security code
The default setting is “0000”. “Changing Your Security Code”
→
p.155
4
Set the font size
Setting the font size → p.146
5
Set whether to send location information via the GPS function
If Permit to send loc. is set to “ON”, enter your security code. Setting location request → p.312
6
Set the keypad sound
Keypad sound → p.127
7
Set the Neuropointer speed
Only the “Simple” settings under “Neuropointer” can be performed. Neuropointer → p.144
8
Set whether to show your PushTalk caller ID
PushTalk Caller ID → p.103
9
Update software
A message appears asking whether to update software. Software Update
→
p.487
NOTE
e
Even if the operation of initial settings is interrupted because a call arrives or you press
y
or
t
, the functions
for which settings have been completed remain valid.
e
You can also perform initial settings separately for each function.
e
The confirmation screen to prompt software update appears even when initial settings are canceled.
e
If you set PushTalk Caller ID to “ON” and then make a PushTalk call, all participants’ phone numbers are shown to all
participants. Since phone numbers are important information, be careful when showing them.
ＹＥＳ
ＮＯ
Initial setting
Ｉｎｉｔｉａｌ ｓｅｔｔｉｎｇ
Ｓｔａｒｔ
ｉｎｉｔｉａｌ ｓｅｔｔｉｎｇ
ＯＫ？