Foma N903i, Руководство пользователя

Страница: 93 / 580

91
Continued on next page
Voice/Videophone Calls
<Remote monitoring>
Viewing Distant Locations Using a FOMA Terminal
Remote monitoring is only available between FOMA terminals or between a FOMA terminal and a
phone equipped with the 3G-324M-compatible videophone function. Your FOMA terminal can be
used as either of a dialing or receiving phone for remote monitoring.
d
Remote monitoring can only be carried out when the phone number of the monitoring phone is stored
beforehand in the phone receiving the remote monitoring and Remote monitoring is set to “ON”.
Preparing the receiving phone
Set the phone number of the dialing phone (Other ID) and delay until the remote monitoring begins
(Ringing time) on the phone receiving remote monitoring.
d
Up to 5 IDs can be stored.
1
Videophone settings screen (p.86)
X
“Remote
monitoring”
X
Enter your security code
X
“Other ID”
The “Other ID” screen appears.
2
Select “<Not recorded>”
■
To change a recorded ID
X
Select an ID to change
3
Enter the phone number of the other phone
X
d
X
t
The remote monitoring screen reappears.
4
“Ringing time”
X
Enter a ring time (003-120 seconds)
Enter the time as a 3-digit number. Entering a 3-digit number sets the ring time.
■ To set the displayed time
X
Without entering a time, press
d
5
“Set”
X
“ON”
Remote monitoring is set and “ ” appears on the standby screen.
■
To turn remote monitoring off
X
“OFF”
6
Position a FOMA terminal
In remote monitoring, an image from the front camera is sent to
the dialing phone.
Put the receiving FOMA terminal in the monitoring position,
ensuring that it is switched on and unfolded.
If the FOMA terminal is left folded, voice and a substitute image
overlapped with “
カメラオフ Camera off” are sent instead of
camera images.
Function menu (Other ID screen)
Default setting Other ID: Not recorded Ringing time: 5 sec. Set: OFF
NOTE
e
The ring time set for remote monitoring cannot be the same as that set for “Record message” or “Automatic
answer”.
e
If the ring time set for “Call Forwarding” on the receiving phone is shorter than the one set for remote monitoring,
“Call Forwarding” takes priority. To give priority to remote monitoring, set a shorter ring time than the “Call
Forwarding” setting.
Look-up
address Sets the number of the other party.
Phonebook Stores a number stored in the phonebook.
Dialed calls Stores a number stored in the Dialed calls record.
Received calls Stores a number stored in the Received calls record.
Delete this Deletes the highlighted ID.
Other ID
〈Ｎｏｔ ｒｅｃｏｒｄｅｄ〉
Ｓｅｌｅｃｔ ＦＵＮＣ
〈Ｎｏｔ ｒｅｃｏｒｄｅｄ〉
〈Ｎｏｔ ｒｅｃｏｒｄｅｄ〉
〈Ｎｏｔ ｒｅｃｏｒｄｅｄ〉
Ｏｔｈｅｒ ＩＤ
〈Ｎｏｔ ｒｅｃｏｒｄｅｄ〉
Function menu
¨
p.91
Front
camera
Adjust the
angle