Foma N903i, Руководство пользователя

Страница: 399 / 580

397
Continued on next page
Other Useful Functions
*1: The animation shown for the “Schedule” or “To Do list”
alarm varies depending on the selected icon or
category. If an i-motion is set as the alarm tone for
“Alarm clock”, “Schedule” or “To Do list”, the image
appears during the alarm.
*2: This operation is performed when “Alarm preferred” is
set. When “Operation preferred” is set, the “ ”
(Missed alarm) desktop icon appears on the standby
screen.
→
p.397
d
To stop an alarm tone
■
Alarm clock
When “Snooze OFF” is set
Pressing any key stops the alarm tone,
animation or i-motion. If you press any key
again, the release tone (“pipip”) sounds and the
display is cleared.
When “Snooze ON” is set
Pressing any key stops the alarm tone, animation
or i-motion and the alarm message “Snooze...”
appears. After the “Snooze...” message appears
for about 5 minutes, the alarm is given again. If
you press
y
while the “Snooze...” message
appears, the release tone (“pipip”) sounds and
the snooze setting is released.
■ Schedule and To Do list
Pressing any key stops the alarm tone, animation
or i-motion and the alarm message remains
shown. Pressing any key again clears the alarm
message. However, pressing any external key
with a FOMA terminal folded does not close the
alarm screen.
■ If a call arrives during an alarm
The alarm stops and a FOMA terminal receives
the call. The “Alarm clock” snooze setting is also
canceled.
Checking details of an alarm
that could not be given
If a FOMA terminal was unable to give an alarm,
the “
” (Missed alarm) desktop icon appears
on the standby screen. You can check the
details of the missed alarm (Missed alarm info)
from the desktop icon.
1
On the standby
screen
X
d
X
“ ”
The missed alarm information
for “Alarm clock”, “Schedule” or
“To Do list” appears.
2
Check the details
X
t
The standby screen reappears and the “ ”
(Missed alarm) desktop icon disappears.
Dial lock/
Omakase
Lock/
Original lock
set Regardless of the
“Alarm setting” setting,
no alarm is given when
the specified time is
reached. If a FOMA
terminal is turned off, it
is not automatically
turned on even when
the specified time is
reached and the “ ”
(Missed alarm)
desktop icon does not
appear after unlocking.
When Original lock is
set, the “ ” (Missed
alarm) desktop icon
appears on the
standby screen,
however, when Dial
lock/Omakase Lock is
set, this icon appears
after unlocking.
→ p.397
Regardless of
the “Alarm
setting” setting,
no alarm is given
when the
specified time is
reached.
When Original
lock is set, the
“ ” (Missed
alarm) desktop
icon appears on
the standby
screen, however,
when Dial lock/
Omakase Lock is
set, this icon
appears after
unlocking.
→ p.397
NOTE
e The alarm volume for “Schedule” and “To Do list”
follows the “Phone” setting under “Ring volume”.
e
The volume of the clock alarm tone sounded during
a call is the same as that specified in “Volume”.
e
Even if “Snooze ON” is set, the snooze function is
not activated for the alarm of Alarm clock during a
call.
e
Unless “Phone” under “Vibrator” is set to “OFF”, both
vibration and the alarm tone are given as an alarm.
e
Even if an i-motion is set in “Alarm tone”, the i-motion
is not played when it cannot be activated (e.g. during
a call). Instead, the clock alarm tone, specified icon
and animation corresponding to the category are
used for an alarm.
<Alarm priority sequence>
e When the “Alarm clock”, “Schedule” and “To Do list”
alarms are set to sound at the same time, alarm
priority is assigned as follows.
① Alarm clock ② To Do list ③ Schedule
Status
Function
Alarm clock
Schedule,
To Do list
NOTE
e Snooze is canceled when:
a
A voice call, videophone call or PushTalk call is
received
a
“Alarm preferred” is selected in “Alarm setting” and
then the alarm for Alarm clock, Schedule or To Do
list is given
e
If “Keypad sound” is set to “OFF”, the release tone
does not sound.
Ｍｉｓｓｅｄ ａｌａｒｍ