Fluke OF-500 OptiFiber Скачать руководство пользователя страница 113

Страница: 113 / 282

Using the OTDR

Bi-Directional Testing

3-39

Bi-Directional Testing

To test cabling in both directions and save the bi-
directional results, proceed as follows:

On the

Job

tab, enter names for

END 1

and

END 2

identify the ends of the cabling. Name

END 1

as the

end you will test first.

Set

THIS END

END 1

Test all the cabling and save the results from

END 1

On the

Job

tab, change

THIS END

END 2

; then test

all the cabling from the other end. When you save
each result, use the same fiber ID you used for the
results from the first end. The ID will be in the

IDs IN

CURRENT FOLDER

list.

Comparing OTDR Traces

The trace overlay function lets you see two OTDR traces
at the same time. This lets you do the following:

•

Compare a link’s current trace with a past trace to
see if the link has changed.

•

Compare traces from links in the same run to check
for differences.

Содержание OF-500 OptiFiber



























































































































































































































































































Результаты поиска

Содержание OF-500 OptiFiber

Отзывы:

Бренды по названию

Популярные бренды

Fluke OF-500 OptiFiber, Техническое справочное руководство

Результаты поиска

Содержание OF-500 OptiFiber

Отзывы:

Бренды по названию

Популярные бренды