Fluke 5502A, Руководство оператора

Страница: 220 / 378

5502A
Operators Manual
6-28
2. Format of report: PRINT (designed to be read), SPREAD
(designed to be loaded into a
spreadsheet )
3. Calibration interval to be used for instrument specifications in the
report: I90D (90 day spec), I1Y (I year spec)
4. Serial port through which to print: HOST , UUT
Example:
PR-PRT STORED, PRINT, i90D, HOST
*PUD
Sequential Overlapped Coupled IEEE-488 RS-232
x x x x
x
(Protected User Data command) Stores a string of 64 characters (maximum), which is
kept in the Calibrator non-volatile memory. (While saving configuration data in the non-
volatile memory, a period of about 2 seconds, the Calibrator does not respond to remote
commands.) This command works only when the CALIBRATION switch on the rear
panel of the Calibrator is in the ENABLE position. Include a line feed (RS-232) character
to stop the block data or End or Identify (EOI) command (IEEE-488).
Parameter:
#2
<nn><nn characters string> (definite length)
#0
<character string> (indefinite length)
“
<character string>
“
(character string)
‘
<character string>
‘
(character string)
Example:
*PUD #0CAL LAB NUMBER 1
Store the string
CAL LAB NUMBER 1
in the protected user data area with the indefinite
length format.
Example:
*PUD #216CAL LAB NUMBER 1
Store the string
CAL LAB NUMBER 1
in the protected user data area with the definite
length format, where #2 means two digits follow which represent the number of text
characters nn in
CAL LAB NUMBER 1
(including spaces=16).
Example:
*PUD “CAL LAB NUMBER 1”
Store the string
CAL LAB NUMBER 1
in the protected user data area with the character
string format.
*PUD?
Sequential Overlapped Coupled IEEE-488 RS-232
x x x x
x
(Protected User Data query) Shows the contents of the *PUD (Protected User Data)
memory in definite length format.
Response:
#2
nn<nn characters>
Example:
*PUD?
shows
#216CAL LAB NUMBER 1
Shows #2 then 16 then 16 characters of text (with spaces) stored in the nonvolatile
memory.
RANGE?
Sequential Overlapped
Coupled
IEEE-488 RS-232
x x x x x
(Range query) Shows the current output ranges. The primary output and secondary
outputs are shown. If there is no secondary output,
0
is shown. Dual outputs are shown
with
P
for primary output (front panel NORMAL terminals) and
S
for secondary output
(front panel AUX terminals).
Response: <primary output>,<secondary output>
Examples:
DC330MV,0
(dc volts 330 mV range)