3.0 SYSTEM OPERATION
3-6
CyberCat 254/1016 Operation Manual
UL S2203
Rev 6, 09/2015
P/N: 06-326-2
FM
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0
A
P O W E R - U P R E S E T
B
C U S T O M M S G P A N E L 0 0 1
C
0 8 : 0 0 : 0 0 A 0 8 / 0 1 / 2 0 1 1
D
E V E N T X X X X O F Y Y Y Y
Exhibit 3-2: Power-Up Reset Display
•
Row A – Indicates activation of the panel’s power-up reset process.
•
Row B – Display a 20 character custom message that can be changed to suit your project
requirements.
•
Row C – Displays the current system time and date.
•
Row D – Display the total number of system events present on the system.
Note:
Upon completion of the power-up/reset process, the panel will display the System Normal screen.
If any alarm or trouble event exists after a system reset, all NACs, control outputs, and panel audio and
visual indicators will reactivate.
3.3.2
NORMAL STATE
The system operates in Normal State when no alarm or troubles exists. In Normal State, the control panel
does the following:
1. Green AC POWER LED illuminates.
2. Supervises loop devices (requests device status every 8 seconds). If device fails to report, panel will
indicate DEVICE MISSING trouble within 1 minute. Likewise, if a new device is present on the
system and not in the panel configuration, a DEVICE NOT IN CONFIG trouble will be reported.
3. LED on SLC devices will blink every 5 seconds.
4. SLC devices communicate their status directly to other devices (peer-to-peer).
5. Supervises panel NAC and auxiliary power circuits.
6. Supervises AC/DC power.
7. Supervises devices connected to peripheral bus.
8. Displays a system normal message as follows:
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0
A
C Y B E R C A T v 7 . X X
B
F I K E C O R P O R A T I O N
C
0 8 : 0 0 : 0 0 A 1 0 / 0 1 / 2 0 1 5
D
A L : 0 0 0 S U : 0 0 0 T R : 0 0 0
Exhibit 3-3: System Normal Display
•
Row A – Displays a standard system message including panel name and firmware operating version.
•
Row B – Displays a 20 character custom message that can be changed to suit your project
requirements.
•
Row C – Displays the current system time and date.
•
Row D – Displays the number of Alarm (AL), Supervisory (SU), and Trouble (TR) events present on
the system.
