Epson S1C17001, Техническое руководство

Страница: 147 / 351

12 8-BIT TIMER (T8F)
138 EPSON
S1C17001 TECHNICAL MANUAL
0x4206: 8-bit Timer Control Register (T8F_CTL)
Register name Address Bit Name Function Setting Init. R/W Remarks
8-bit Timer
Control Register
(T8F_CTL) 0x4206
(16 bits)
D15–12 – reserved – – – 0 when being read.
D11–8 TFMD[3:0] Fine mode setup 0x0 to 0xf 0x0 R/W Set a number of times
to insert delay into a
16-underflow period.
D7–5 – reserved – – – 0 when being read.
D4 TRMD Count mode select 1 One shot 0 Repeat 0 R/W
D3–2 – reserved – – – 0 when being read.
D1 PRESER Timer reset 1 Reset 0 Ignored 0 W
D0 PRUN Timer run/stop control 1 Run 0 Stop 0 R/W
D[15:12] Reserved
D[11:8] TFMD[3:0]: Fine Mode Setup Bits
Correct the transfer rate error. (Default: 0x0)
The TFMD[3:0] bit specifies the delay pattern to be inserted into the 16 underflow intervals. Inserting
one delay extends the output clock cycle by one count clock cycle. This setting delays the interrupt tim-
ing in the same way.
Table 12.10.3: Delay patterns specified by TFMD[3:0]
TFMD[3:0]
Underflow number
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
0x0 – – – – – – – – – – – – – – – –
0x1 – – – – – – – – – – – – – – – D
0x2 – – – – – – – D – – – – – – – D
0x3 – – – – – – – D – – – D – – – D
0x4 – – – D – – – D – – – D – – – D
0x5 – – – D – – – D – – – D – D – D
0x6 – – – D – D – D – – – D – D – D
0x7 – – – D – D – D – D – D – D – D
0x8 – D – D – D – D – D – D – D – D
0x9 – D – D – D – D – D – D – D D D
0xa – D – D – D D D – D – D – D D D
0xb – D – D – D D D – D D D – D D D
0xc – D D D – D D D – D D D – D D D
0xd – D D D – D D D – D D D D D D D
0xe – D D D D D D D – D D D D D D D
0xf – D D D D D D D D D D D D D D D
D: Indicates the insertion of a delay cycle.
Count clock
Underflow signal (no correction)
Underflow signal (with correction)
Output clock (no correction)
Output clock (with correction)
Delay
15 16
15 16
1
1
Figure 12.10.1: Delay cycle insertion in Fine mode
D[7:5] Reserved