Installation and commissioning
multi N/C pharma HT
58
}
Connect the power supply unit to the mains network. Switch on the autosampler.
Checking and changing the
configuration
}
Switch on the analyzer. Start the multiWin program and initialize the analysis sys-
tem.
}
Check the device configuration with the Instrument | System-Information menu op-
tion in the multiWin set-up info window.
}
If necessary, change the configuration:
– Exit the multiWin program.
– Start the setup tool in the Windows interface with Start | Program files | multi-
Win | multiWin setup tool.
– Select the autosampler type in the Sampler list.
– Exit the multiWin set-up tool window with [Create].
– Start the multiWin program and initialize the analysis system.
– Open the Options window with menu option Configuration | Edit options. Go to
the Analyzer components tab.
– In the Sampler group, select the appropriate tablet and vessel size.
}
Exit the window with [OK].
}
Adjust the autosampler before the first start.
See also
2
