![background image](http://html1.mh-extra.com/html/eaton/elc-pb/elc-pb_programming-manual_4017452322.webp)
3 . I n s t r u c t i o n S e t
M N050 03003E F or mo re infor ma tio n vi sit:
w w w. e a t o n . c o m
3-153
M1010: When M1010=ON, continuous pulses will be sent out Y0. When M1010=OFF, the
PLSY instruction will send the number of pulses specified in
S
2
.
M1023: When M1023=ON, Y1 will send continuous pulses. When M1023=OFF, the PLSY
instruction will send the number of pulses specified in
S
2
.
M1029: M1029= ON after Y0 pulse output is complete.
M1030: M1030= ON after Y1 pulse output is complete.
M1078: Pause sending pulses out Y0.
M1079: Pause sending pulses out Y1.
D1030: Present number of pulses sent out Y0 (LOW WORD).
D1031: Present number of pulses sent out Y0 (HIGH WORD).
D1032: Present number of pulses sent out Y1 (LOW WORD).
D1033: Present number of pulses sent out Y1 (HIGH WORD).
2.
Flags and special registers for ELC-PC/PA/PH series:
M1010: When On, Y0 output will be continuous with no limit on the number of pulses. When
Off, the number of output pulses from Y0 will be determined by
S
2
.
M1023: When On, Y1 output will be continuous with no limit on the number of pulses. When
Off, the number of output pulses from Y1 will be determined by
S
2
.
M1029: On when Y0 pulse output is complete.
M1030: On when Y1 pulse output is complete.
M1078: Pause sending pulses out Y0
M1079: Pause sending pulses out Y1
M1102: For ELC-PH, M1102=ON when Y10 pulse output is complete.
M1103: For ELC-PH, M1103=ON when Y11 pulse output is complete.
M1347: For ELC-PC/PA/PH, Auto reset Y0 when high speed pulse output is complete
M1348: For ELC-PC/PA/PH, Auto reset Y1 when high speed pulse output is complete
M1524: For ELC-PH, Auto reset Y10 when high speed pulse output is complete
M1525: For ELC-PH, Auto reset Y11 when high speed pulse output is complete
D1030: Low word of the current number of output pulses from Y0
D1031: High word of the current number of output pulses from Y0
D1032: Low word of the current number of output pulses from Y1
D1033: High word of the current number of output pulses from Y1
D1348: For ELC-PH, Present total number pulses for output Y10 (LOW WORD).
D1349: For ELC-PH, Present total number pulses for output Y10 (HIGH WORD).
D1350: For ELC-PH, Present total number pulses for output Y11 (LOW WORD).
Содержание ELC-PB
