![background image](http://html1.mh-extra.com/html/eaton/elc-pb/elc-pb_programming-manual_4017452564.webp)
3 . I n s t r u c t i o n S e t
M N 0 5 0 0 3 0 0 3 E F o r m o r e
i n f o r m a t i o n
v i s i t :
w w w. e a t o n . c o m
3 - 3 9 5
+3,000
-3,000
Current
position
Ramp up time
Start / End freq. Min: 6Hz
Ramp down time
2.
Registers for setting ramp up/down time and start/end frequency:
a) Output
Y0:
Default: 100ms
Y0(D1343)
Y0(D1340)
Y0 (D1340)
Min: 6Hz
Min: 6Hz
Y0(D1343)
Ramp-up
slope
Sample time
of ramp-up
Pulse output frequency
End freq.
Numbers of
output pulses
Ramp down time
Ramp up time
Default: 100ms
Current
position
Start freq.
b) This instruction can be used many times in the program, but only one instruction will be
activated at a time.
c) After activating the instruction, parameters cannot be modified unless the instruction is OFF.
3. Related
Flags:
M1029:
CH0 (Y0, Y1) pulse output execution complete.
M1102:
CH1 (Y2, Y3) pulse output execution complete
M1078:
CH0 (Y0, Y1) pulse output pause (immediate)
M1104:
CH1 (Y2, Y3) pulse output pause (immediate)
M1108:
CH0 (Y0, Y1) pulse output pause (ramp down).
M1110:
CH1 (Y2, Y3) pulse output pause (ramp down)
M1156:
Enabling the mask and alignment mark function on I400/I401(X4)
corresponding to Y0.
M1158:
Enabling the mask and alignment mark function on I600/I601(X6)
corresponding to Y2.
M1305:
Reverse Y1 pulse output direction in high speed pulse output instructions
M1306:
Reverse Y3 pulse output direction in high speed pulse output instructions
Содержание ELC-PB
