![background image](http://html1.mh-extra.com/html/eaton/elc-pb/elc-pb_programming-manual_4017452652.webp)
3 . I n s t r u c t i o n S e t
M N 0 5 0 0 3 0 0 3 E F or m o r e i nf o r m a t i o n v i s i t : www. e a t o n. c o m
3-483
D1377:
Low word of the current number of output pulses of CH3
D1378:
High word of the current number of output pulses of CH3
D1340:
Start/end frequency settings for CH0 (default: K200)
D1352:
Start/end frequency settings for CH1 (default: K200)
D1379:
Start/end frequency settings for CH2 (default: K200)
D1380:
Start/end frequency settings for CH3 (default: K200)
D1348:
Deceleration time of CH0 pulse output when M1534 = On (default: K100)
D1349:
Deceleration time of CH1 pulse output when M1535 = On (default: K100)
D1350:
Deceleration time of CH2 pulse output when M1536 = On (default: K100)
D1351:
Deceleration time of CH3 pulse output when M1537 = On (default: K100)
D1343:
Acceleration/deceleration time for CH0 pulse output (default: K100)
D1353:
Acceleration/deceleration time for CH1 pulse output (default: K100)
D1381:
Acceleration/deceleration time for CH2 pulse output (default: K100)
D1382:
Acceleration/deceleration time for CH3 pulse output (default: K100)
3. ELCM-PH/PA Flag explanations:
M1029
CH0 (Y0, Y1) pulse output execution complete.
M1102
CH1 (Y2, Y3) pulse output execution complete.
M1078
M1078 = ON, CH0 (Y0, Y1) pulse output pause (immediate)
M1104
M1104 = ON CH1 (Y2, Y3) pulse output pause (immediate)
M1108
CH0 (Y0, Y1) pulse output pause (ramp down). M1108 = ON during ramp down.
M1110
CH1 (Y2, Y3) pulse output pause (ramp down). M1110 = ON during ramp down.
M1156
Enabling the mask and alignment mark function on I400/I401(X4)
corresponding to Y0.
M1158
Enabling the mask and alignment mark function on I600/I601(X6)
corresponding to Y2.
M1538
Indicating pause status for CH0 (Y0, Y1).M1538 = ON when output paused.
M1540
Indicating pause status for CH1 (Y2, Y3). M1540 = ON when output paused
M1305
Reverse CH0 (Y0, Y1) pulse output direction. M1305 = ON, pulse output
direction is reversed.
M1306
Reverse CH1 (Y2, Y3) pulse output direction. M1306 = ON, pulse output
direction is reversed
M1347
Auto-reset CH0 (Y0, Y1) when high speed pulse output completed. M1347 will
be reset after CH0 (Y0, Y1) pulse output is completed.
M1524
Auto-reset CH1 (Y2, Y3) when high speed pulse output completed. M524 will be
reset after CH1 (Y2, Y3) pulse output is completed.
M1534
Enable ramp-down time setting on Y0. Must be used with D1348
M1535
Enable ramp-down time setting on Y2. Must be used with D1349
Содержание ELC-PB
