Eaton ELC-PB, Руководство по программированию

Страница: 496 / 728

3 . I n s t r u c t i o n S e t
M N 0 5 0 0 3 0 0 3 E F o r m o r e i n f o r m a t i o n v i s i t : w w w. e a t o n . c o m
3 - 3 2 7
API Mnemonic Operands Function
143 DELAY P S Delay
Bit Devices Word devices Program Steps
Type
OP
X Y M S K H KnX KnY KnM KnS T C D E F
S * * *
DELAY, DELAYP: 3 steps
ELC ELCB ELCM
PB PC/PA/PH PV PB PH/PA
32 16 P 32 16 P 32 16 P 32 16 P 32 16 P
Operands:
S : Delay time, units are 0.1ms (K1~K1000)
Description:
After executing the DELAY instruction, in every scan the program will be delayed by the time
specified in the Delay instruction. The delay will occur in each scan immediately following the
execution of the Delay instruction.
Program Example:
If an external interrupt occurs when X0 goes from OFF to ON, the interrupt subroutine will execute
the DELAY instruction and Y0=ON will be delayed by 2 seconds when X1=ON.
M1000
Main routine program
FEND
I001
X1
Y0
IRET
END
EI
REF Y0 K8
DELAY K20
T=2ms
Interrupt input X0
Input X1
Output Y0
Points to note:
1. When executing the DELAY instruction, the delay time may increase upon the execution of
communications, high-speed counters and high-speed pulse output commands.
2. If the external output (transistor output or relay output) is specified, the delay time may
increase due to the transistor or relay turn-on delay.