manualshive.com logo in svg

Doran 4100L, Инструкция по эксплуатации, Страница: 82 / 95

Поделиться
Скачать
Doran 4100L Скачать руководство пользователя страница 82

Error Code:

"Er  Fun"

Function Error

Cause:

This is a normal message that displays when the parameters are
being defaulted by the user - see Section 11.

Error Code:

"Er   t-"

Negative Tare Error (SET mode)

Cause:

Attempting to enter a negative tare in the SET mode.

Remedy:

Enter only positive tares.

Error Code:

"Er  tAr"

Negative Tare Error (PTT mode)

Cause:

Attempting to enter a negative platform weight as a tare.

Remedy:

Enter only positive platform weights as tares.

Error Code:

"--OL--"

Overload

Cause:

Weight on scale is over 103% of capacity.

Remedy:

Remove excess weight.

Error Code:

"--UL--"

Underload

Cause:

Weight on scale is less than -3% of capacity (platter may be
removed).

Remedy:

Replace weighing platter.

Error Code:

"grS-OL"

Gross Overload

Cause:

Weight on platter has greatly exceeded the capacity of the scale,
incorrect connections or calibration, or defective load cell or main
board.

Remedy:

Remove excess weight, check connections and calibration, replace
defective load cell or main board.

Error Code:

"grS-UL"

Gross Underload

Cause:

Weighing platter is removed, incorrect connections or calibration, or
defective load cell or main board.

Remedy:

Replace platter, check connections and calibration, replace defective
load cell or main board.

Section 10 Error Codes

74

Содержание 4100L
































































































Отзывы:

Нет отзывов