Doran 4100L Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 95

Doran 4100L Скачать руководство пользователя страница 8

INTRODUCTION

Congratulations! You have chosen the most technologically advanced, highest quality
stainless steel checkweighing scale available today. The Doran Scales Model 4200
incorporates state-of-the-art CMOS microprocessor technology, full front panel
programmability, and an environmentally sealed load cell to provide you, the user, with the
ultimate in scale power, flexibility and reliability. This combination of the 4200's leading
edge electronics with its rugged, stainless steel, gasketed construction and high quality,
water resistant double-capacity load cell is designed to provide the highest degree of
accuracy while maintaining the durability necessary to hold up to hostile industrial
environments.

Major features of the 4200 that set it apart from other scales are:

• Fully front panel programmable
• Environmentally protected load cell
• 304 stainless steel construction
• Automatic push-button calibration
• Digital tare & over/under tolerance setability
• Push-button ZERO, GROSS/NET, TARE, UNITS and PRINT
• 20 Product memory for Tare, Over & Under (200 products optional)
• Bright, easy to read LED display
• Read weight in LB, KG, OZ, G, LB & OZ
• OVER-ACCEPT-UNDER Checkweigh Bargraph Indicator
• 1 Bi-directional Serial Data Port (Selectable baud rate, parity)
• 1 Serial Data Printer Port (Selectable baud rate, parity)
• Selectable print formats - includes a fully configurable print buffer
• User programmable features include:

-Analog Filter
-Digital Filter (display update rate/averaging)
-Zero tracking
-Push-button enable
-Keyboard activation annunciator
-Motion aperture
-Legal For Trade operation
-Data output modes
-Capacity and resolution

• Options:

-100 Product Memory (includes Time and Date and Setpoint Outputs)
-RS485, 20ma serial communications hardware configurations

Please be sure to read this entire manual to assure yourself of getting all the benefits of
these and other advanced features of the Doran Scales Model 4200. This scale is backed
by a full 2 year factory warranty. Please contact Sales Department for sales for ordering
inquiries.

vi

«
...
6
7
8
9
10
...
»

Содержание 4100L
































































































Отзывы:

Нет отзывов