21
Auto tuning
1
Set the input function to “TUNER”.
2
Watching the display, press the BAND button to
select the desired band (AM or FM).
3
Press the MODE button to set the auto tuning
mode.
Lit
4
Press the TUNING UP or DOWN button.
• Automatic searching begins, then stops when
a station is tuned in.
NOTE:
• When in the auto tuning mode on the FM band, the
“STEREO” indicator lights on the display when a
stereo broadcast is tuned in. At open frequencies,
the noise is muted and the “TUNED” and “STEREO”
indicators turn off.
B
3
4
1
2
Manual tuning
1
Set the input function to “TUNER”.
3
Press the MODE button to set the manual tuning
mode.
Check that the display’s “AUTO” indicator turns
off.
2
Watching the display, press the BAND button to
select the desired band (AM or FM).
Press the TUNING UP or DOWN button to tune
in the desired station.
The frequency changes continuously when the
button is held in.
4
NOTE:
• When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the “STEREO” indicator
turns off.
(Main unit)
(Main unit)
(Main unit)
(Main unit)
ENGLISH
Preset stations
B
1,4
3
2
TV/DBS
VCR-1
VCR-2
SURROUND
MODE
TUNER
SHIFT
V. AUX
INPUT MODE CDR / TAPE
CHANNEL
TAPE
·
VCR
3
0
0
2
6
7
7
3
8
4
9
5
6
2
3
Preparations:
Use the “Auto tuning” or “Manual tuning” operation
to tune in the station to be preset in the memory.
1
Press the MEMORY button.
(Main unit)
NOTE:
Please make sure the “AUDIO” position
of the slide switch on the remote control
unit.
2
Press the SHIFT button and select the desired
memory block (A to E).
SHIFT
(Main unit)
(Remote control unit)
3
Press the PRESET UP or DOWN button to select
the desired preset channel (1 to 8).
CHANNEL
(Main unit)
(Remote control unit)
4
Press the MEMORY button again to store the
station in the preset memory.
(Main unit)
To preset other channels, repeat steps 1 to 4.
A total of 40 broadcast stations can be preset – 8
stations (channels 1 to 8) in each of blocks A to E.
Recalling preset stations
B
2
1
TV/DBS
VCR-1
VCR-2
SURROUND
MODE
TUNER
SHIFT
V. AUX
INPUT MODE CDR / TAPE
CHANNEL
TAPE
·
VCR
3
0
0
2
6
7
7
3
8
4
9
5
6
1
2
1
Watching the display, press the SHIFT button to
select the preset memory block.
SHIFT
NOTE:
Please make sure the “AUDIO” position
of the slide switch on the remote control
unit.
(Main unit)
(Remote control unit)
2
Watching the display, press the PRESET UP or
DOWN button to select the desired preset channel.
CHANNEL
(Main unit)
(Remote control unit)
