19
DSP surround simulation
• To operate the surround mode and surround parameters from the remote control unit.
1
Select the surround mode for the input channel.
SURROUND
MODE
(Remote control unit)
The surround mode switches in the following
order each time the SURROUND MODE button
is pressed:
STEREO
5CH STEREO
DOLBY PRO LOGIC
MONO MOVIE
ROCK ARENA
JAZZ CLUB
VIDEO GAME
MATRIX
VIRTUAL
SURROUND
DVD/VDP
CD
PHONO
TV/DBS
VCR-1
VCR-2
SURROUND
MODE
TUNER
SHIFT
STATUS MUTING
T.TONE
MASTER
VOL
TITLE
DISC SKIP+
V. AUX
INPUT MODE CDR / TAPE
CD·MD/CDR·DVD/VDP
VIDEO SELECT
SYSTEM
SET UP
MENU
SELECT
RETURN
DISPLAY
SURROUND
CH SELECT
CHANNEL
TAPE
·
VCR
OFF
3
0
0
2
6
7
9
8
2
3
6
7
8
4
9
5
1
0
6
2
7
3
1
2
3
2
To enter the surround parameter setting mode, press the SURROUND button.
• The surround parameter switches in the following order each time the
SURROUND button is pressed for the different surround modes.
MENU
SURROUND
(Remote control unit)
ROOM SIZE
EFFECT
DEFAULT
DELAY
DEFAULT
EFFECT
DEFAULT
• ROCK ARENA
• JAZZ CLUB
• VIDEO GAME
• MONO MOVIE
• MATRIX
• VIRTUAL
Use the
(left) and
(right) buttons to set the room size.
ROOM SIZE MED
LARGE
MED-L
MED
MED-S
SMALL
(Remote control unit)
(right) button
(left) button
Use the
(left) and
(right) buttons to set the effect level.
EFFECT LEVEL 10
15
10
1
(Remote control unit)
(right) button
(left) button
3
Display the parameter you want to adjust, then use the
(left) and
(right) buttons to set it.
(1) ROOM SIZE
(Initial)
(2) EFFECT LEVEL
(Initial)
Use the
(left) and
(right) buttons to set the delay time.
DELAY 30ms
110ms
30ms
0ms
(Remote control unit)
(right) button
(left) button
(3) DELAY TIME
(Initial)
ENGLISH
To reset the settings to the factory defaults, use the
(left) and
(right)
buttons to display “Yes”.
DEFAULT Y/N
YES
NO
(Remote control unit)
(right) button
(left) button
NOTE:
• When making parameter settings, the display will return to the regular condition several seconds after the
last button was pressed and the setting will be completed.
(4) DEFAULT
• Operating the surround mode and surround parameters from the main unit‘s panel.
1
Press the SELECT knob to select the surround
mode.
SELECT
(Main unit)
• When turned clockwise
STEREO
DOLBY PRO LOGIC
5CH STEREO
MONO MOVIE
ROCK ARENA
JAZZ CLUB
VIDEO GAME
MATRIX
VIRTUAL SURROUND
STEREO
DOLBY PRO LOGIC
5CH STEREO
MONO MOVIE
ROCK ARENA
JAZZ CLUB
VIDEO GAME
MATRIX
VIRTUAL SURROUND
• When turned counterclockwise
To select the surround mode while adjusting the surround parameters, channel volume or tone control,
press the SURROUND MODE button then operate the selector.
(Main unit)
B
1 2 1,3
2
Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to set.
• The parameters which can be set differ for the different surround modes. (Refer to “Surround Modes and
Parameters” on page 20.)
(Main unit)
3
Display the parameter you want to adjust, then turn the SELECT knob to set it.
NOTE:
• When playing PCM digital signals or analog signals in the 5CH STEREO, ROCK ARENA, JAZZ CLUB, VIDEO
GAME, MONO MOVIE or MATRIX surround modes and the input signal switches to a digital signal encoded
in Dolby Digital, the Dolby surround mode switches automatically. When the input signal switches to a DTS
signal, the mode automatically switches to DTS surround.
