11
Input the distances from the listening position to the speakers and set the surround
delay time.
Preparations:
Measure the distances from the listening position to the speakers (L
1
to L
3
on the
diagram at the right).
L
1
:
Distance from center speaker to listening position
L
2
:
Distance from front speakers to listening position
L
3
:
Distance from surround speaker to listening position
CAUTION:
Set the center speaker at the same distance from the front speakers (left and right) or the subwoofer, or so
that the difference in distance (L
2
– L
1
) is 1.5 meters or less.
Set the surround speakers (left and right) at the same distance from the front speakers (left and right) or the
subwoofer, or so that the difference in distance (L
2
– L
3
) is 4.5 meters or less.
• The number changes in units of 0.1 meter each time one of the buttons is
pressed. Select the value closest to the measured distance.
(“/SW” appears only when subwoofer = yes.)
Press the SELECT or
(down) button to switch to the center speaker setting.
L
1
L
2
L
3
6 FRNT/SW 3.6m
Listening
position
Center
FL
FR
Setting the delay time
SL
SR
Use the
(left) and
(right) buttons to set the distance from the front
speakers and subwoofer to the listening position.
1
Use the
(left) and
(right) buttons to set the distance from the center
speakers to the listening position.
2
Use the
(left) and
(right) buttons to set the distance from the surround
speakers to the listening position.
3
• The number changes in units of 0.1 meter each time one of the buttons is
pressed. Select the value closest to the measured distance.
Press the SELECT or
(down) button to switch to the surround speaker setting.
• The number changes in units of 0.1 meter each time one of the buttons is
pressed. Select the value closest to the measured distance.
Press the SELECT or
(down) button to enter the setting and switch the
DIGITAL input (COAX) setting.
7 CENTER 3.6m
8 SURR. 3.0m
NOTE:
• No setting when “None” has been selected for the center speaker.
NOTE:
• No setting when “None” has been selected for the surround speakers.
NOTE:
• The speaker distance can be adjusted between 0 and 18 meters in steps of 0.1 meter.
ENGLISH
NOTE:
• PHONO, TUNER and V. AUX cannot be selected.
• Select “OFF” if nothing is connected.
Press the SELECT or
(down) button to switch the OPTICAL input 2 (OPT 2)
setting.
9 COAX DVD
CD
DVD
TV
VCR1
VCR2
CDR
OFF
10 OPT1 TV
CD
DVD
TV
VCR1
VCR2
CDR
OFF
Input the type of components connected to the digital input terminals.
Digital input setup
Use the
(left) and
(right) buttons to set the type of device connected
to the COAXIAL input (COAXIAL) terminal.
1
Use the
(left) and
(right) buttons to set the type of device connected
to the OPTICAL input 1 (OPT 1) terminal.
2
(right) button
(left) button
Press the SELECT or
(down) button to switch the optical input 1 (OPT 1)
setting.
(right) button
(left) button
• Select “OFF” if nothing is connected.
This completes the system setup operations. Once the system is set up, there is no need to make the settings
again unless other components or speakers are connected to or the speaker layout is changed.
After setting up the system
Press the SYSTEM button to finish system set up.
1
(Initial)
(Initial)
• Select “OFF” if nothing is connected.
11 OPT2 CDR
CD
DVD
TV
VCR1
VCR2
CDR
OFF
Use the
(left) and
(right) buttons to set the type of device connected
to the OPTICAL input 2 (OPT 2) terminal.
3
(right) button
(left) button
Press the SELECT or
(down) button if you want to start the settings over
front the beginning.
(Initial)