17
7
Set the various surround parameters.
ON
OFF
or
or
SELECT
SELECT
CINEMA EQ OFF
• CINEMA EQ setting
ON
OFF
or
or
SELECT
SELECT
PANORAMA OFF
• PANORAMA setting
0
3
6
or
or
SELECT
SELECT
DIMENSION 3
• DIMENSION setting
0
CENTER WIDTH O
4
7
or
or
SELECT
SELECT
• CENTER WIDTH setting
Yes
Y/N
No
or
or
SELECT
SELECT
DEFAULT Y/N
• DEFAULT setting
Select “Yes” to reset to the factory defaults.
Stop pressing buttons once you have completed
setting the surround parameters. After several
seconds the normal display reappears and the
settings you have made are automatically set.
NOTE:
• When making parameter settings, the display will return to the regular condition several seconds after the last
button was pressed and the setting will be completed.
Surround parameters
q
Pro Logic
II
Mode:
The Cinema mode is the standard required mode for all A/V systems.
The Music mode is recommended as the standard mode for autosound music systems (no video), and is
optional for A/V systems.
The Pro Logic mode offers the same robust surround processing as original Pro Logic in case the source
contents is not of optimum quality.
Select one of the modes (“Cinema”, “Music” or “Pro Logic”).
Panorama Mode:
This mode extends the front stereo image to include the surround speakers for an exciting “wraparound”
effect with side wall imaging.
Select “OFF” or “ON”.
Dimension Control:
This control gradually adjust the soundfield either towards the front or towards the rear.
The control can be set in 7 steps from 0 to 6.
Center Width Control:
This control adjust the center image so it may be heard only from the center speaker; only from the left/right
speakers as a phontom image; or from all three front speakers to varying degrees.
The control can be set in 8 steps from 0 to 7.
Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
1
Select the input source.
DVD/VDP
3
(Main unit)
(Remote control unit)
q
Select an input source set to digital (COAXIAL/
OPTICAL) (see page 11).
Playback with a digital input
B
1
3
1
4
2
2
EX:
ENGLISH
8
(Main unit)
(Remote control unit)
w
Set the input mode to “AUTO” or “DTS”.
2
Select the Dolby/DTS Surround mode.
SURROUND
MODE
When performing this operation from the main
unit’s panel, press the SURROUND MODE
button, then press the SELECT knob and select
“DOLBY/DTS”.
• The following appears on the display.
(DOLBY PLII, DOLBY PROLOGIC, DOLBY
DIGITAL, DTS)
SELECT
(Remote control unit)
(Main unit)
3
Play a program source with the
,
mark.
• The Dolby Digital indicator
lights when playing Dolby
Digital sources.
DIGITAL
Light
• The DTS indicator lights when
playing DTS sources.
Light
B
DVD/VDP
CD
PHONO
TV/DBS
VCR-1
VCR-2
SURROUND
MODE
TUNER
SHIFT
REMOTE CONTROL UNIT RC-897
STATUS MUTING
T.TONE
MASTER
VOL
TITLE
DISC SKIP+
V. AUX
INPUT MODE CDR / TAPE
CHANNEL
TV
CD·MD/CDR·DVD/VDP
VIDEO SELECT
SYSTEM
SET UP
MENU
SELECT
RETURN
DISPLAY
SURROUND
CH SELECT
VOLUME
CHANNEL
AVR/AVC
DVD/VDP
TV
VCR
AUDIO
CD
MD/CDR
VIDEO
POWER
TAPE
·
VCR
OFF
ON
3
0
0
2
6
7
9
8
2
3
6
7
8
4
9
5
1
0
6
2
7
3
1
1
4, 5, 6, 7
2
4, 5, 6, 7
Set the surround parameter according to the source.
First, press the SURROUND button.
MENU
SURROUND
4
(Remote control unit)
NOTE:
Please make sure the
“AUDIO” position of the
slide switch on the
remote control unit.
Use the
(left) and
(right) buttons to set the
CINEMA EQ.
ON
OFF
CINEMA EQ OFF
Press the SURROUND or
(down) button to switch to the D. COMP.
setting.
MENU
SURROUND
(Remote control unit)
(Remote control unit)
(right) button
(left) button
(Initial)
The CINEMA EQ mode can be set directly
using the main unit’s CINEMA EQ button.
(Main unit)
•
CINEMA EQ mode turns on
and off each times the
CINEMA EQ button is
pressed.
