Dell iDRAC7, Руководство пользователя

Страница: 89 / 252

cfgUserAdminIpmiSerialPrivilege=15
cfgUserAdminSolEnable=0
– If you have used the get command:
[idrac.users.16]
Enable=Disabled
IpmiLanPrivilege=15
IpmiSerialPrivilege=15
!!Password=******** (Write-Only)
Privilege=0x0
SNMPv3AuthenticationType=SHA
SNMPv3Enable=Disabled
SNMPv3PrivacyType=AES
SolEnable=Disabled
UserName=
• The indexes are read-only and cannot be modified. Objects of the indexed group are bound to the index under which
they are listed and any valid configuration to the object value is applicable only to that particular index.
• A predefined set of indexes are available for each indexed group. For more information, see the
RACADM Command
Line Reference Guide for iDRAC7 and CMC
available at dell.com/support/manuals
.
• Use the
racresetcfg
subcommand to reset the iDRAC7 to the default setting, and then run the
racadm
config -f <filename>.cfg
or
racadm set -f <filename>.cfg
command. Make sure that the .cfg
file includes all required objects, users, indexes, and other parameters.
CAUTION: Use the
racresetcfg
subcommand to reset the database and the iDRAC7 NIC settings to the default
settings and remove all users and user configurations. While the root user is available, other user settings are also
reset to the default settings.
Parsing Rules
• All lines that start with '#' are treated as comments. A comment line must start in column one. A '#' character in any
other column is treated as a '#' character. Some modem parameters may include # characters in its string. An
escape character is not required. You may want to generate a .cfg from a
racadm getconfig -f
<filename> .cfg
command, and then perform a
racadm config -f <filename> .cfg
command to a
different iDRAC7, without adding escape characters. Example:
#
# This is a comment
[cfgUserAdmin]
cfgUserAdminPageModemInitString=<Modem init # not a comment>
• All group entries must be surrounded by "
["
and "
]"
characters. The starting "
["
character denoting a group name
must
start in column one. This group name
must
be specified before any of the objects in that group. Objects that do
not include an associated group name generate an error. The configuration data is organized into groups as defined
in the
RACADM Command Line Reference Guide for iDRAC7 and CMC
available at dell.com/support/manuals. The
following example displays a group name, object, and the object’s property value.
[cfgLanNetworking] -{group name}
cfgNicIpAddress=143.154.133.121 {object name}
• All parameters are specified as "object=value" pairs with no white space between the object, =, or value.
White spaces that are included after the value are ignored. A white space inside a value string remains unmodified.
Any character to the right of the '=' is taken as is (for example, a second '=', or a '#', '[', ']', and so forth). These
characters are valid modem chat script characters.
See the example in the previous bullet.
The
racadm getconfig -f <filename> .cfg
command places a comment in front of index objects,
allowing the user to see the included comments.
To view the contents of an indexed group, use the following command:
racadm getconfig -g <groupName> -i <index 1-16>
89