manualshive.com logo in svg

Dell iDRAC7, Руководство пользователя

Dell iDRAC7 - мощный инструмент удаленного управления сервером. Получите руководство пользователя бесплатно, загрузив его с нашего веб-сайта. Расширьте возможности вашего сервера с помощью данного руководства. manualshive.com - ваш источник для загрузки руководств.

Поделиться
Скачать
background image

– System.Power.Cap.Percent

For more information, see the 

RACADM Command Line Reference Guide for iDRAC7 and CMC 

available at dell.com/

support/manuals.

Configuring Power Cap Policy Using iDRAC Settings Utility

To view and configure power policies:

1.

In iDRAC Settings utility, go to Power Configuration.

NOTE: The Power Configuration link is available only if the server power supply unit supports power 
monitoring.

The iDRAC Settings Power Configuration page is displayed.

2.

Select Enabled to enable the iDRAC Power Limit Policy. Else, select Disabled.

3.

Use the recommended settings, or under User Defined Limits, enter the required limits.
For more information about the options, see the 

iDRAC Settings Utility Online Help

.

4.

Click Back, click Finish, and then click Yes.
The power cap values are configured.

Configuring Power Supply Options

You can configure the power supply options such as redundancy policy, hot spare, and power factor correction.
Hot spare is a power supply feature that configures redundant Power Supply Units (PSUs) to turn off depending on the 
server load. This allows the remaining PSUs to operate at a higher load and efficiency. This requires PSUs that support 
this feature, so that it quickly powers ON when needed.
In a two PSU system, either PSU1 or PSU2 can be configured as the primary PSU. In a four PSU system, you must set the 
pair of PSUs (1+1 or 2+2) as the primary PSU.
After Hot Spare is enabled, PSUs can become active or go to sleep based on load. If Hot Spare is enabled, asymmetric 
electrical current sharing between the two PSUs is enabled. One PSU is 

awake

 and provides the majority of the current; 

the other PSU is in sleep mode and provides a small amount of the current. This is often called 1 + 0 with two PSUs and 
hot spare enabled. If all PSU-1s are on Circuit-A and all PSU-2s are on Circuit-B, then with hot spare enabled (default hot 
spare factory configuration), Circuit-B has much less load and triggers the warnings. If hot spare is disabled, the 
electrical current sharing is 50-50 between the two PSUs, the Circuit-A and Circuit-B normally has the same load.
Power factor is the ratio of real power consumed to the apparent power. When power factor correction is enabled, the 
server consumes a small amount of power when the host is OFF. By default, power factor correction is enabled when 
the server is shipped from the factory.

Configuring Power Supply Options Using Web Interface

To configure the power supply options:

1.

In iDRAC7 Web interface, go to Overview

 → 

Server

 → 

Power/Thermal

 → 

Power Configuration

 → 

Power 

Configuration. The Power Configuration page is displayed.

2.

Under Power Supply Options, select the required options. For more information, see 

iDRAC7 Online Help

.

3.

Click Apply. The power supply options are configured.

Configuring Power Supply Options Using RACADM

To configure the power supply options, use the following objects with the set subcommand:

170

Содержание iDRAC7





























































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для iDRAC7

TE Connectivity AMP 3K/40 CE 2161600-1 Original Instructions Manual preview
AMP 3K/40 CE 2161600-1
Бренд: TE Connectivity Страницы: 29
Botex DMX DC-136 User Manual preview
DMX DC-136
Бренд: Botex Страницы: 36
Duke TSC-6/18M Installation Instructions preview
TSC-6/18M
Бренд: Duke Страницы: 4
Eaton Smart Home Controller 2.0 Quick Installation Manual preview
Smart Home Controller 2.0
Бренд: Eaton Страницы: 24
DYNACO DYNALOGIX II DY 4000 Electrical Manual preview
DYNALOGIX II DY 4000
Бренд: DYNACO Страницы: 13
Watlow Anafaze PPC-2000 User Manual preview
Anafaze PPC-2000
Бренд: Watlow Страницы: 320
MRC TECH 6 0001203 Quick Start Manual preview
TECH 6 0001203
Бренд: MRC Страницы: 2
TA SMS14U Manual preview
SMS14U
Бренд: TA Страницы: 4
Heinzmann HELENOS V DC 2005DP.2-01 Manual preview
HELENOS V DC 2005DP.2-01
Бренд: Heinzmann Страницы: 66
American DJ GALATIC STAR 19C User Instructions preview
GALATIC STAR 19C
Бренд: American DJ Страницы: 1
Cairox TSCTK-1 Series Original User Manual preview
TSCTK-1 Series
Бренд: Cairox Страницы: 3
National Instruments cRIO-9031 Getting Started Manual preview
cRIO-9031
Бренд: National Instruments Страницы: 18
3Ware 8006-2LP - Escalade RAID Controller Manual preview
8006-2LP - Escalade RAID Controller
Бренд: 3Ware Страницы: 126
Festo LRP-1/4 Series Operating Instructions Manual preview
LRP-1/4 Series
Бренд: Festo Страницы: 16
Lawler 801-GPM Installation & Maintenance Manual preview
801-GPM
Бренд: Lawler Страницы: 5
Taconova FWCK Installation And Operating Instructions For Manual And Remote Control Options preview
FWCK
Бренд: Taconova Страницы: 24
Kirby Morgan SuperFlow 350 Regulator Manual preview
SuperFlow 350 Regulator
Бренд: Kirby Morgan Страницы: 23
GARO GBO-300 Manual preview
GBO-300
Бренд: GARO Страницы: 63

Бренды по названию

Популярные бренды

Загрузить еще бренды