Dell iDRAC7 Скачать руководство пользователя страница 171

Страница: 171 / 252

•

System.Power.RedundancyPolicy

•

System.Power.Hotspare.Enable

•

System.Power.Hotspare.PrimaryPSU

•

System.Power.PFC.Enable

For more information, see the

RACADM Command Line Reference Guide for iDRAC7 and CMC

available at dell.com/

support/manuals.

Configuring Power Supply Options Using iDRAC Settings Utility

To configure the power supply options:

In iDRAC Settings utility, go to Power Configuration.

NOTE: The Power Configuration link is available only if the server power supply unit supports power
monitoring.

The iDRAC Settings Power Configuration page is displayed.

Under Power Supply Options:

– Enable or disable power supply redundancy.
– Enable or disable hot spare.
– Set the primary power supply unit.
– Enable or disable power factor correction. For more information about the options, see the

iDRAC Settings

Utility Online Help

Click Back, click Finish, and then click Yes.
The power supply options are configured.

Enabling or Disabling Power Button

To enable or disable the power button on the managed system:

In iDRAC Settings utility, go to Front Panel Security.
The iDRAC Settings Front Panel Security page is displayed.

Select Enabled to enable the power button. Else, select Disabled.

Click Back, click Finish, and then click Yes. The settings are saved.

171

Содержание iDRAC7





























































































































































































































































Результаты поиска

Содержание iDRAC7

Отзывы:

Похожие инструкции для iDRAC7

Бренды по названию

Популярные бренды

Dell iDRAC7, Руководство пользователя

Результаты поиска

Содержание iDRAC7

Отзывы:

Похожие инструкции для iDRAC7

Бренды по названию

Популярные бренды