Dell iDRAC7, Руководство пользователя

Страница: 33 / 252

Accessing iDRAC7 Using Local RACADM
For information to access iDRAC7 using local RACADM, see the
RACADM Command Line Reference Guide for iDRAC7
and CMC
available at dell.com/support/manuals.
Accessing iDRAC7 Using Firmware RACADM
You can use SSH or Telnet interfaces to access iDRAC7 and run firmware RACADM commands. For more information,
see the
RACADM Command Line Reference Guide for iDRAC7 and CMC
available at dell.com/support/manuals.
Accessing iDRAC7 Using SMCLP
SMCLP is the default command line prompt when you log in to iDRAC7 using Telnet or SSH. For more information, see
Using SMCLP .
Logging in to iDRAC7 Using Public Key Authentication
You can log into the iDRAC7 over SSH without entering a password. You can also send a single RACADM command as a
command line argument to the SSH application. The command line options behave similar to remote RACADM since the
session ends after the command is completed.
For example:
Logging in:
ssh username@<domain>
or
ssh username@<IP_address>
where
IP_address
is the IP address of the iDRAC7.
Sending RACADM commands:
ssh username@<domain> racadm getversion
ssh username@<domain> racadm getsel
Related Links
Using Public Key Authentication For SSH
Multiple iDRAC7 Sessions
The following table provides the list of multiple iDRAC7 sessions that are possible using the various interfaces.
Table 6. Multiple iDRAC7 Sessions
Interface Number of Sessions
iDRAC7 Web Interface 4
Remote RACADM 4
Firmware RACADM / SMCLP SSH - 2
Telnet - 2
Serial - 1
33