Dell iDRAC7, Руководство пользователя

Страница: 213 / 252

Using Show Verb
To learn more about a target use the
show
verb. This verb displays the target’s properties, sub-targets, associations,
and a list of the SM-CLP verbs that are allowed at that location.
Using the -display Option
The
show –display
option allows you to limit the output of the command to one or more of properties, targets,
associations, and verbs. For example, to display just the properties and targets at the current location, use the following
command:
show -display properties,targets
To list only certain properties, qualify them, as in the following command:
show –d properties=(userid,name) /admin1/system1/sp1/account1
If you only want to show one property, you can omit the parentheses.
Using the -level Option
The
show -level
option executes
show
over additional levels beneath the specified target. To see all targets and
properties in the address space, use the
-l all
option.
Using the -output Option
The
-output
option specifies one of four formats for the output of SM-CLP verbs: text, clpcsv, keyword, and clpxml.
The default format is text, and is the most readable output. The clpcsv format is a comma-separated values format
suitable for loading into a spreadsheet program. The keyword format outputs information as a list of keyword=value
pairs one per line. The clpxml format is an XML document containing a response XML element. The DMTF has specified
the clpcsv and clpxml formats and their specifications can be found on the DMTF website at dmtf.org.
The following example shows how to output the contents of the SEL in XML:
show -l all -output format=clpxml /admin1/system1/logs1/log1
Usage Examples
This section provides use case scenarios for SMCLP:
• Server Power Management
• SEL Management
• MAP Target Navigation
Server Power Management
The following examples show how to use SMCLP to perform power management operations on a managed system.
Type the following commands at the SMCLP command prompt:
• To switch off the server:
stop /system1
The following message is displayed:
system1 has been stopped successfully
213